Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Mahogany Pipe Cabinet-My First Wood Project

Posts

Mahogany Pipe Cabinet-My First Wood Project

#1

Mahogany Pipe Cabinet-My First Wood Project

George@Colonel's Workshop-Havertown PA

>Good Afternoon Friends,

I built this cabinet after returning from Vietnam in 1963. It was my first stab at building a cabinet. I had my father's Hickock electric drill and no other power tools at all. A disc sander could be attached to the drill, and I used that to insure the panels were lined up! The cabinet body is Honduras mahogany butt joined with wood dowels. I may have used DuPont Duco cement when I hammered in the dowels. It held up pretty well over the intervening 46 years. I can remember taking a wood rasp to the dowel ends to flush them with the cabinet sides, top and bottom. The original doors were plywood, and all was painted several times with red mahogany stain, and then varnished--"good and thick".


img

Re: Mahogany Pipe Cabinet-My First Wood Project

#2

Re: Mahogany Pipe Cabinet-My First Wood Project

George@Colonel's Workshop-Havertown PA

>Admittedly, the doors never looked all that great, and the plastic wood used to fill the ratty plywood edges was a poor match. The pipe cabinet did hold my pipes and tobacco well and eventually became one of those precious personal items which followed me whereever the Air Force sent me. After I retired I decided to re-do it completely. I acquired some African mahogany and made two raised panel doors. I also removed about 1/4 inch from the face frame all around and re-mortised for the new doors. In the photo, they look curved. That is a distortion.


img

Re: Mahogany Pipe Cabinet-My First Wood Project

#3

Re: Mahogany Pipe Cabinet-My First Wood Project

George@Colonel's Workshop-Havertown PA

>For its rebirth, I removed the back, and rabbeted for a new one from birch. I also replaced the innards, substituting the racks for the original shelved. I was delighted at how well the Honduran and African mahogany worked together, and applied only a trace amount of aniline dye to the doors before finishing. This time I overcoated all of it with a spit coat of dewaxed shallec. Tung oil, several coats, and then paste waxed. Now its better than new, and the pipes seem to like it.

Of all the things I've done in the shop since this first project, this first project is my favorite of all.

George


img

Re: Mahogany Pipe Cabinet-My First Wood Project

#4

Re: Mahogany Pipe Cabinet-My First Wood Project

Kneale Brownson..Awaiting return to CO snows

>Nice cabinet. The other day I saw an ad in the local newspaper seeking used smoking pipes. I had a collection similar to yours totalling 40-odd pipes I hadn't touched in nearly 20 years. Those, a couple racks with humidors and a couple unopened tins of MacBarens Symphony brought me $140. Sure glad I gave up smoking.

Re: Mahogany Pipe Cabinet-My First Wood Project

#5

Jim DeLaney, Austintown, Ohio

Re: Mahogany Pipe Cabinet-My First Wood Project

Jim DeLaney, Austintown, Ohio

>Lessee George,

Replaced the back, doors, and innards... Cut down the face frame...

It's beginning to sound like my Great-Grandfather's ax. The handle's been replaced three times, and the head twice, but it's still Grandpa's hatchet... ;-)

Jim D.

Re: Mahogany Pipe Cabinet-My First Wood Project

#6

Ellis Walentine

Excellent saga, Colonel

Ellis Walentine

>I used to be a pipe smoker myself, when I was young. As much as I enjoyed it, the ladies in my life were less enthusiastic. Your cabinet must have an amazing aroma after lo these many years of housing that collection of yours. Like so many other woodworking projects that we do for ourselves, it rises to the occasion. We do what we can with the skills and resources we have. You have done very well, and the reiteration is even better.

Thanks for the post.

Ellis

Re: Mahogany Pipe Cabinet-My First Wood Project

#7

Holy Smokes!

Jim Toews - Walla Walla, WA

>Sorry George. I felt that someone had to dish it back to you! "Nice and thick", eh? I remember finishing some of my first projects like that, too. Could of simply dipped them in vat a few times, sort of like making candles. In my case it would probably have left a smoother finish. But it would have played havoc with the hinges... In any case, your cabinet seems to have held up well over the intervening decades. Great first project!

Cheers!

Jim

Re: Mahogany Pipe Cabinet-My First Wood Project

#8

Re: Mahogany Pipe Cabinet-My First Wood Project

Jim Shaver - Oakville, Ont, Canada

>Hi George,

I love this cabinet. It is very much one I would identify with who you are, well done my friend!

take care,

Jim

Re: Mahogany Pipe Cabinet-My First Wood Project

#9

JL

Re: Mahogany Pipe Cabinet-My First Wood Project

JL

>Sort of like a well-worn shoe. Held together by duct tape and "Shoe-goo". Except that yours is much prettier :).