Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Refinishing a desk

Posts

Refinishing a desk

#1

Refinishing a desk

Matt Papania

>I have just stained a mahogany and satin wood desk with a combination of a transtint dye and 2#lb cut dewaxed shellac. It looks amazing.After this I lightly sanded with a 320-400 grit paper and tacked cloth all the remaining dust.I want to use a gel stain over this and want to do some decorative speckling on the sides and drawer fronts.Do I need to put another coat of dewaxed shellac on it as a sealer coat before the gel stain? What cut should it be? I am going to top coat with 3 coats of polyurethane.After I finish with the polyurethane do I need to rub it out or just leave it?

Thanks Matt

Re: Refinishing a desk

#2

avoiding disaster

Bill Tindall, E.TN

>I can't answer your questions specifically, but I know that you need to be developing and practicing this finish schedule on a test piece and not on the desk. What you are proposing is sufficiently complicated that there will be plenty of opportunity to screw up some part and then you will get to strip it and start over.