Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Large White Oak Down in New Jersey (Sawer needed)

Posts

Large White Oak Down in New Jersey (Sawer needed)

#1

Large White Oak Down in New Jersey (Sawer needed)

Stephen Roth

>A large white oak in my backyard needs to be cut down. The tree is 4 feet in diameter at about 2 feet up from the ground, and staying that diameter for about 8-10 feet. Only the top of the tree is broken; the bottom looks like it would make good furniture wood.

I was wondering if there are any members out there with a (large) portable mill that would be willing to share the load. (I would probably want less than half, as white oak is not my wood of choice.) I'd share the work.

I am having a tree man cut down the tree, so the log would be on the ground. It is only a few feet from a flat driveway.

Can provide pictures if you are interested.

I live in Chatham, New Jersey.

Re: Large White Oak Down in New Jersey (Sawer needed)

#2

Sawyers

Mark Mandell - Gone Round In Jersey

>Stephen,

I've not heard of anyone near you with a portable mill big enough. Suggest you haul it to one of several mills in range. There used to be one in the Washington area, and then there's East Coast Log out 78 near Alpha.

Cut you log to 10' and seal the ends 'till you get it hauled. East Coast also has a kiln if you want to have it dried

Re: Large White Oak Down in New Jersey (Sawer needed)

#3

Re: Large White Oak Down in New Jersey (Sawer need

Phil in NJ

>Hi,

You could call Bob Roth in Verona NJ, 973 857 1610. I haven't talked to him in a while... not sure if he is still in the business, but he used to have a portable mill.

-Phil