Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

My 14" Jet Bandsaw needs a bigger table

Posts

My 14" Jet Bandsaw needs a bigger table

#1

My 14" Jet Bandsaw needs a bigger table

Joe in a Cleveland suburb

>Have any of you made a larger table for your BS?

  • How did you do it?


  • How is it attached?


  • Any pictures?


  • Any plans?


  • Any recent FW articles (that I don't remember)?

  • My biggest wonder about making one is what about the fence - how would my fence attach? It's the no-so-great stock fence that came with the BS when I bought it about 8 or 10 years ago.

    I can't buy a pre-made one right now. Seems it would be easy to put one together with some scrap ply though.

    Thanks for any input and/or thoughts.

    Joe

    Re: My 14" Jet Bandsaw needs a bigger table

    #2

    Re: My 14" Jet Bandsaw needs a bigger table

    George@Colonel's Workshop-Havertown PA

    >Good Morning Joe,

    My old Jet 14" blue bandsaw was equipped with an oversized table which I made. It fit over the original table top. I box jointed 1/2" stock, and rabbeted for a "benchtop" of birch ply. It was held on the saw by gravity, and kept on place by cleats. I used clamps for a shop made fence. Worked fine. My oversize table went with my old saw into #3 son's shop a couple years ago, and is in use today.

    Frankly, I found it one more thing to remove and replace when I switched blades, so I don't know if I actually gained much by installing it. Ny new 14" Jet w/aftermarket fence uses the stock table, and I am content with that.

    George

    Re: My 14" Jet Bandsaw needs a bigger table

    #3

    Try this link ... *LINK*

    Mike Farinella

    >with some pics. Not a Jet, but close.


    DP Table

    Re: My 14" Jet Bandsaw needs a bigger table

    #4

    My Delta BS has a blade, not a bit.

    Barry Irby

    >I Like that table, but it would work better on my drill press than on the Band Saw. I have wondered why we have table saws that resemble aircraft carriers and bandsaws the size of stamps?