Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Latest project

Posts

Latest project

#1

Latest project

Clint Searl, at the base of Haycock Mtn

>Completed construction of the dining table I started about a month ago. The cherry slab is 36" x 70" with pau amarillo butterflys and an embedded ammonite fossil. Top is finished with NC lacquer under alkyd lacquer. The base is 1 1/4" copper pipe and fittings, which needs a final polish.

Clint


img

Re: Latest project

#2

Imagination and Skill

George@Colonel's Workshop-Havertown PA

>Good Morning Clint,

It takes more than a gorgeous piece of cherry to make something that beautiful. I would be sweating the inlay work, especially if they weere large. More chance of a goof, I guess. Where did you get such a beautifyl piece of stock?

George

Re: Latest project

#3

Re: Imagination and Skill

Clint Searl, at the base of Haycock Mtn

>I always sweat the inlay work. This time I got lucky. I get all my wood at Willard Bros., off Rt 1 north of Trenton. They have great selection in rough, S2S, and flitches at good prices.

Clint

Re: Latest project

#4

Like the top, not so sure of support

Eddie Pacheco: Antioch, Ca.

>Hi Clint. The top looks killer on that table. The slab has been made to look beautiful. The base looks like what it is, copper tubing, tees, and caps. Maybe if the edges of the tees and caps were blended into the tubing it would smooth the transitions. Patination? From your past work, I certainly know you have the skill set to make an equally beautiful base for that nice piece of wood.

Re: Latest project

#5

Re: Like the top, not so sure of support

Clint Searl, at the base of Haycock Mtn

>Eddie, thanks for the comments. I would have preferred flush fittings for the copper, but I could only find them for brass, which I have used in the past, but thought that polished copper would be more complimentary to the cherry. I also considered patination, but have done so many that I'm a bit tired of it, though it's always a future option, as the top attaches with screws via hinge brackets.

Clint

Re: Latest project

#6

Ellis Walentine

Don't forget...

Ellis Walentine

>... to tell Willard Bros. that Woodfinder� sent you.

I used to deal with them quite often in the 70's when I was working around New Hope. You could always count on some oddball pieces of wood lurking around their shop.

Ellis