Shaker Style tables-Latest Project
Andy Lincoln,in Dearborn MI
>Hi All,
With my latest wood haul I came up with the idea to build a pair of Shaker style end tables as a wedding gift for a friend�s upcoming wedding on Sept.12th.
The mother of the bride to be was my wife�s maid of honor at our wedding 14 years ago. Linda wasn�t exactly sure which wood she liked the best from the
New pile I had obtained so I devised a plan where I am now making 8 tables. 2 tables from red elm,2 from cherry,2 from ash and 2 from walnut. Linda will pick the 2
she thinks are the right ones and the rest will go to a consignment gallery and hopefully onto permanent homes.
I spent a portion of yesterday working on rough milling the stock for the aprons.
| From Shaker Style End Tables |
This pile of stock yielded these pieces for aprons and drawer fronts:
| From Shaker Style End Tables |
Today I pulled stock and cut to rough length the materials needed for the legs:
| From Shaker Style End Tables |
After spending a fair amount of time with a template of an 1 3/8� square to orient the grain diagonally to try to make the legs have straight grain on all 4 sides.
I will end up with more legs than I need but I am expecting some flaws, knots, cracks, and other defects that may make the legs undesirable.
| From Shaker Style End Tables |
This step although time consuming, setting and resetting angles on the table saw to cut the shapes free, is a necessary evil and I think worth the effort.
| From Shaker Style End Tables |
Tomorrow I will continue cutting the leg stock and start sizing the material to finished dimensions. After that I will begin working on the stock for the tops.
I will continue to photograph and document the process throughout the project.
Thanks for Looking,
Andy



