Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Dust Collector pre-separator???

Posts

Dust Collector pre-separator???

#1

Dust Collector pre-separator???

Andy Lincoln,in Dearborn,MI

>Hi All,

I bought the trash can lid pre separator to catch the heavy chips from the planer/jointer during the intial milling of my stock.Can I add a contractors size plastic garbage bag into the metal can or will it just get sucked up and in the oulet side of the lid?

Thanks,

Andy

Re: Dust Collector pre-separator???

#2

JL

Re: Dust Collector pre-separator???

JL

>Depends on how you "stick it down". You can use a shop vac or something similar to put an initial suction on the bottom. Have a valve in the bottom of the trash can so you can disconnect the vacuum hose. It works reasonably well.

I had something like that on my old system.

Re: Dust Collector pre-separator???

#3

Holding in the liner

Kneale Brownson..Awaiting return to CO snows

>I have a DIY version using a 55 gallon drum and big plastic bags that are held in place by a wood ring with legs. The legs are smoothed and rounded so they slide in but don't rip the bags.

I pull the ring before pulling the bag from the barrel.

A bag of hardwood chips gets pretty hefty to lift. As I approach 70, they're more difficlt than when I made this setup maybe 20 years ago.


img

Re: Dust Collector pre-separator???

#4

Re: Dust Collector pre-separator???

Glenn Madsen near San Francisco

>I built my own lid, plywood and plumbing parts, for a 35 gal barrel.

No liner. Too much fuss. It's easier to dump it when it's half full, for a couple of reasons. First, it's lighter. Second, any more full than that, and too much gets up the pipe to the DC, and the secondary bags, the ones I like never to empty, then need dumping. And that means moving a large pile of timber.

YMMV.

Re: Dust Collector pre-separator???

#5

Re: Dust Collector pre-separator???

Pete in Holland, MI

>Mine is a metal garbage can. Might be concerned with a plastic can generating static as the stuff swirls around in there. Maybe a heavy duty can would work, but I know a metal one works.

Tip: On my can, I cut a 1" wide window about 3" from top and bottom. Screw in a 3" wide strip of polycarb and seal with silicone. Makes a good sight glass to see how much dust you have. As mentioned earlier, after about half full, I get more transfer into the main collector bag system, so empty when it gets half full.