Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Glass questions?

Posts

Glass questions?

#1

JL

Glass questions?

JL

>What do ya'll think of glass coverings for wood table tops? What sort of glass would you use?

Which type of glass do you use for shelves? (How thick)

Which type of glass would you use for things like flag cases and barrister bookcases?

I had a source for tempered glass that I used back in the city. I made a project or two with glass shelves. I had them cut it and "polish" the edges. I had been using glass that I got at Michael's for bookcases - but there aren't any of those up here. I'm basically looking for acceptable substitutes. There is a local glass shop which can supply me (hopefully).

Re: Glass questions?

#2

Re: Glass questions?

steve mackay

>Germans make "in-craved" relief tabletops with glass tops. They use tempered. For flag (and any other case) my guy recomended just reular glass due to cost. Works fine for me. I also asked about all the hype over "UV glass" for printed ond other paper items and such. Unless you're hanging the item in direct sunlight the anti-UV craze is pretty much just hype.

Re: Glass questions?

#3

Re: Glass questions?

Lee Schierer - McKean, PA

>"What do ya'll think of glass coverings for wood table tops? What sort of glass would you use?" For a table you'll want at least 1/4" glass either plate or tempered.

"Which type of glass do you use for shelves? (How thick)" Minimum thickness is 1/4", but you may need thicker depending upon the span and the weight to be supported.

"Which type of glass would you use for things like flag cases and barrister bookcases?" For flag cases use single strength window glass, the same for doors for book cases.

Lee

Re: Glass questions?

#4

Re: Glass questions?

Yonak

>When I had a piece of glass cut for our dining room table I asked for a recommendation from the glass shop. I got glass that measures about .2" (I don't know what that thickness is called, but it's thicker than double strength, but thinner than 1/4".) After 3 years I've had no problems except when I scratched it by dragging something sharp over it. 8^(

By the way, I also asked for a recommendation about pads to keep the glass off the wood, and he said he's seen it both ways, but that he doesn't use them. I don't .. no problems.

Re: Glass questions?

#5

Re: Glass questions?

Fred Davis

>JL,

like one said , shelf length or items stored on them determined a safe thickness for glass

I made a China Cabinet for Elaine and the shelves are 3/8ths thick with eased edges. They span about thirty inches.

For a book case that extends to the floor like a Barrister , Tempered glass is required for safety in most places I have lived and common sense dictates it as well.

For cabinet door panels, double strength serves the purpose , single strength is a accident waiting to happen.

FredD

Re: Glass questions?

#6

JL

Thanks for the replies.

JL

>