More Info
Mark Mandell - Gone Round In Jersey
>Okay
First, you've got some work to do on the drawers; namely an alcohol bath/rubdown to redissolve what you applied to get the excess off. You can brush shellac, but it's hard to control; padding (similar to french polishing but without the oil) is much easier and more accurate. Shellac sprays so well that I suggest you consider it; especially if you're using dye to color your coating. Key here is many light coats with patience.
2. If you're looking for consistent color, you may also find yourself in the rinse-and-reapply mode where you have those drips and runs. Sorry. Good part is that you can reuse what you rise off after letting it evaporate a bit. BTW, I prefer 1-1/2 lb cut, but that's just personal preference.
Now for the good news:
The old adage is that "shellac sticks to everything and everything sticks to shellac" so, because you've used dewaxed product, you can topcoat with poly once your shellacing is done.
With your desk nicely sealed and tinted with the shellac, let your item get very dry for 3 days or more. You can then consider the poly. Rather than going for the oil based stuff, consider a coat or two of an acrylic waterborne formulation such as General's Enduro clear poly or Target's 9000 poly. Using good nylon they brush and level well, but with an HLVP spray, they'll go down like glass with a little practice. Being water white and clear, they won't change the color of your piece and you'll only need to apply them to the top for durability.
Hope this helps.