Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

>27 Jul 2009

Good Morning,

The family and I have been doing some woodworking of sort for the last 2 or 3 weeks...firewood. We had a tree die this year in our yard that was an oak. Just above the ground about a foot the tree was 44" across the butt of the tree. It took me and my boys about 2 days to get the last 9' trunk section cut and laying on the ground. Once I got it laying on the ground I then found out why it didn't want to fall over....My MS-361 chainsaw with it's 20" bar just wasn't long enough to get the very center of the tree and that 4" was enough to cause us some real grief in getting it on the ground. Now it's a matter of cutting up the trunk section but I have to be careful when cutting it up as it has a steel fence post inside the truck, about 4" in from the outer bark (yes, the tree grew around an old steel fence post..amazing..simply amazing), and makes it very hard on a chainsaw. I'll have to work around it and see what I can do.

Been working a LOT at the day job lately and I'm getting ready for yet another Disaster Recovery Exercise for another customer, which means that it will be another trip to Philly.

The family and I watch a movie last night. I always enjoy spending time with my wife and kids.

Well, my veneer for the wedding gift should be here today. I'm sure I'll have questions, but I'll save those for when I start doing the actual veneer work.

Well, that's it for me....so what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Time For Wedges

Mark Mandell - Gone Round In Jersey

>And a good sledge. You'll need several in steel to get things started (safety glasses, please), then drive in hardwood replicas to split the log. Then do it again using the buried post as the splitting point. You now can do your slice-n-dice. BTDT

Re: WC Weekend Accomplishments....

#3

Ellis Walentine

Routine stuff

Ellis Walentine

>Mowed some grass, organized the closets in my bedroom and my office, took a short hike with the dog, visited the kids... oh, yes, and started final drawings for my kitchen cabinets. LOML informs me that we can't put it off any more. That's what I was afraid of. :-)

Ellis

Re: WC Weekend Accomplishments....

#4

Re: WC Weekend Accomplishments....

Stephen Kirk in Quakertown PA

>I'm a bachelor for the next week, so that meant some decent time in the shop. I'm building the second set of gates for the drylot. Finished the tenons on the 8 rails and then made the mortises in the end pieces. Working on our humid eastern PA weekend seemed to really slow me down, though. I was hoping to fit all the tenons, then drill for the drawbores and start making pins - but that didn't happen.

I started biking again, and I got in rides that past several mornings. I remember when a 20 mile ride seemed short, now a 5 miler really hurts! Well, only way to get back in shape - go through the pain.

Spent some time capturing a bit of video footage for my neighbor and his friends playing paintball. Those kids are nuts.

Otherwise, I'm on chores, so the animals kept me busy. Little time spent watching some movies and playing games rounded out the weekend.

Re: WC Weekend Accomplishments....

#5

Started Another Bedroom Suite..

George@Colonel's Workshop-Havertown PA

>Good Morning Dennis,

That big oak must have provided serious shade. I hate to see a big tree like that come down. Will you slab some of it for lumber? I wiped some Seal Coat on top of my #2 daughter's dining room table, which I now have anchored to the frame and legs for enhanced stability. Have been waiting for #3 son to find time to install the pins in the leaves and ends. I don't trust my eyes. I began another bedroom suite project. I am doing Shaker this time, and on advice of ther forum am using cherry with QS Sycamore to accent. Cherry and I don't work well together, but I felt inspired. I went thru most all of my left over wood and got just enough cherry to do the first night stand. I'll need to drive into the forrest to acquire enough cherry and sycamore to do the 2nd piece and finish the 1st. Presently, I have all the panels and top glued up. I also glued up 4 leg blanks and did the mortising and lay out work for tapers which I'll cup today. Have a great week Dennis. When will you be in Philly agasin?

George

Re: WC Weekend Accomplishments....

#6

Party

Joe in a Cleveland Suburb

>Graduation party for my twins high school graduation. Boy am I glad that's (high school) over.

Daughter is going to WVU and my son is going to Denison University.

Joe

(proud father of twins)

Re: WC Weekend Accomplishments....

#7

No woodworking but

Andy Lincoln,in Dearborn,MI

>I did spend alot of time in the shop this weekend.I took a canopy cover that I saved after losing the frame in a storm and sewed covers for my new patio furniture.I had to borrow a sewing machine and with a quick set of instructions I set off to make the covers.

From Recent work

My wife isn't much for domestic items so she laughed when I mentioned this project.I also hadn't used a sewing machine since 7th grade Home Ec(like 28+ years ago).

From Recent work

I have just now sprayed them with a camp dry water proofing solution.Does anyone know why Thompsons waterseal isn't recommended for fabrics?I was going to use it but the label advised not to.Discoloration/staining is not a factor for me and if that is the only potential problem...then I'll be buying a $7 gallon and loading a pump sprayer.

Our existing patio dining set occupies the area in the deck box ,and I will hopefully be able to build a deck box that matched the rest of the cedar work I have recently done to house the cushions when not in use.With the economy being bleak here I wasn't going to spend+/- $100 on covers for the furniture when with alittle gumption I could make my own and recycle some existing materials in the process.

They are far from being perfect,they don't look store bought,that's for sure,but I actually had alot of fun making them and the wife did have to admit that I did make them: )

Andy

Re: WC Weekend Accomplishments....

#8

Re: WC Weekend Accomplishments....

Doug Ridley

>Finished 6 dozen Christmas ornaments like these.


img

Re: WC Weekend Accomplishments....

#9

Re: WC Weekend Accomplishments....

Mike Fitterling

>Finally got back to woodworking after spending the last few months restoring a '68 Honda motorcycle. My father-in-law built a new shop a while back, and we have been building cabinets for it in my shop last week and yesterday. They have birch cases with walnut face frames. One is 77", another is 56", and another is 55"; one will be the bench for his lathe and the other two will be on each side of his RAS. We finished milling all the face frame stock yesterday and just need to attach it and cut some moveable shelves for the interiors.

I finally did get the bike going and took it on it, hopefully, last road test last night. I have been over everything with this bike and one problem often led to another. I relined the tank, put on a new petcock and fuel lines, cleaned and recleaned the carbs just to find out they were mismatched and would never run properly, replaced the coils, etc. etc. Turns out the mismatched carbs was the biggest issue and I finally bought some salvaged carbs, which matched the one I had on the right side and then installed the left of the salvaged pair on the lef ton my bike. It ran like a top last night wihtout me fussing with the tuning at all. I have learned a lot about motorcycles from this expericne, the first bike I ever worked on. Now I get to ride. Oh yeah--1968 Honda CB350, 6,000 miles on the dial, stored since '87.


img

Re: WC Weekend Accomplishments....

#10

Moving Day Approaches

Mark Mandell - Gone Round In Jersey

>Got the garage storage finished. Now set to paint the walls. That done, this weekend is moving Stubby from basement shop to the garage. Got some prime maple ready, and looking forward to turning again.

Re: WC Weekend Accomplishments....

#11

Re: Not nearly enough information there...

Glenn Madsen near San Francisco

>Those are nice! What are they made from, and how?

Re: WC Weekend Accomplishments....

#12

Re: Party

Thomas S Stockton------WebKitFormBoundaryRU4sWQOIA

>Congrats Joe, just went through the same thing with my son. Senior year is pretty stressful with all the applications, college visits, multiple financial aid forms and once you get accepted more college visits. I couldn't imagine doing it with two kids at the same time. We were lucky and he narrowed it down to two schools pretty fast. now he's 18 so he can sign for everything including his loan to pay for part of it.

My mom went to Denison in the late 50's, but in those days her parents told her were she was going, so she had a great time hearing about were he got in and the cchoices he had.

Tom

Re: WC Weekend Accomplishments....

#13

Re: Not nearly enough information there...

Doug Ridley

>They are made from Tupelo Gum and are power carved. I started making them from scraps using a knife about 25 years ago but they were so small I kept cutting myself so I switched to power and haven't looked back. Have made around 3000 since then. Glad you like them. Here is a pic of one after painting. He has closed eyes but I also make some with open eyes, some winking, and some squinting.


img