Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

getting started

Posts

getting started

#1

getting started

Jonathan van Heijzen

>newby here. I have finally bought a home where I have a little bit of room to work in a garage. I have made a few very crude projects and decided that I want to do some more woodworking. My question is this:

I am on a limited budget (very limited) and I have nothing save a few very crude hand tools. What would be the best piece of equipment for me to buy to get started in this?

Re: getting started

#2

Lee Grindinger

What sort of work do you see yourself doing?

Lee Grindinger

>For home repair and improvement I'd list drills and a mitre saw at the top of the list.

For cabinetmaking I'd put a decent table saw at the top.

Re: getting started

#3

Re: getting started

Clint Searl, at the base of Haycock Mtn

>Find a copy of "Encyclopedia of Furniture Making" by Ernest Joyce. It's the only reference you'll ever need.

Clint

Re: getting started

#4

Re: getting started

Nat Robison

>It depends on what you wish to do but I would put a table saw at the top of the list. You'd be amazed what you can build with that and some screws. I first decided to get into woodworking because my wife bought my daughter a crappy, knock-together bookcase from Target for about $40. I told myself I could build something better. With only a table saw, glue, and some screws, I built a far sturdier bookcase out of $15 worth of MDF.

I doubt anyone would lust after my table saw....it's a Black & Decker that I bought at Lowe's for about $350 when I didn't know any better. However, it cuts straight and true and the fence is good. I would easily say I've gotten my money out of it.

Re: getting started

#5

Re: getting started

DaleLenz

>Agree with table saw for sure. Then let your project(s) tell you what you need. But think things through and read all you can about woodworking. One of my first projects had "raised panel doors" told my wife needed a router, did not know I could of cut the raised panels on a table saw, which I had. The router has came in handy.

Re: getting started

#6

Re: getting started

George@Colonel's Workshop-Havertown PA

>Good Afternoon Jonathan,

I remember starting out a couple times with either nothing or next to nothing. While in North Africa I used a Black and Decker jig saw and a 3/8" electric drill from the Air Force Exchange. It got me started. I still have use for the successors of these two items although I've moved on a few feet over the intervening 40+years.

George

Re: getting started

#7

Auctions,Auctions, Auctions !!!

Frank inForest Hill

>

Re: getting started

#8

Re: Auctions,Auctions, Auctions !!!

Jonathan van Heijzen

>thanks guys

Re: getting started

#9

Re: getting started

steve mackay

>My table saw is THE MOST versitile peaice of equipment I own or have ever used. When I started I thought it was for ripping and cross cutting (read : rough-out work). The longer I use it the more I learn it will do (with creative thinking). For the hundred and fifty or two hundred at Sears ( yes, I said it !) you'll get more than your moneys worth out of it (I went through three of these in ten years and didn't feel cheated). Once you've chosen a path of woodworking you may opt for a bigger, better rig. And, again, worth every penny ! I bought a big combination sander and then band saw before I got a TS. If I had gotten the TS first I probably never would have spent the money on a BS. The second most important tool is a good combination square. 15". Forget the angle head and center finder for now. Blow the money on Ebay get a good Starret . Again, worth every penny. All that said, I started out in the Iraqi "No-fly" Zone with a pocket knife, hacksaw blade and packing crates. Turned out some good stuff too although rather crude (call it my "trench art" phase !). Its all up to your creativity and how bad you want it. Best of luck !

Re: getting started

#10

The two most versatile tools

Bricofleur

>Jonathan,

According to me, with imagination, patience and minimum skills you should be able to build almost anything with a tablesaw and a router. I hope you already have a drill, a jigsaw and a hammer. Finally, the bigger the budget, the minimum patience you need.

Best,

Serge

www.atelierdubricoleur.spaces.live.com

Re: getting started

#11

Just to give a totally different viewpoint:

Roy Anderson

>Go over to the hand tools side and ask the same question. You will be amazed what you can do with a good Stanley No. 5 jack plane and a Diston cross cut saw, properly tuned up. If you are really on a limited budget, get a couple of planks of 2 by twelve southern yellow pine, screw them to a couple of saw horses (like I did) for a work bench, buy a No. 5 and a saw off E-Bay for less than $40 total, learn to tune them up properly by reading the articles in the articles section of this forum and you are on your way.

Re: getting started

#13

Re: getting started

Jim Dillon

>Jonathan,

Welcome to Wood Central! I started with a Milwaukee corded electrical drill and an old Rockwell jigsaw, then moved into the big time and got a router, sliding compound miter saw, a drill press, a bandsaw, jointer, planer, and finally a table saw. That rough order was dictated by finances and happened over a five year period. While the table saw is incredibly versatile, and a must-have, the jointer and planer are indispensable for preparing your rough wood. But since you may be initially buying wood that has been surfaced and planed from your local Borg, a table saw, bandsaw, router, and drill press would serve you well.

Since money is tight, shop for sales on the brands that are generally recognized as good value for the money, such as Grizzley, Jet, Rigid etc. And if you are in a more metropolitan area, used tools might be an option - but you kinda gotta know what you are buying.

Fifteen years ago, when I started to build my shop, I found help from a chapter in a paperback book from Taunton Press called "The Small Wood Shop". The chapter "Setting up Shop" described advice by three well-known woodworking authors: Peter Korn, Michael Duginske, and Mario Rodriguez, and heavily influenced my thinking. A newer reference is "Setting Up Shop" by Sandor Nagyszalanczy. FWW (Fine Wood Workinjg magazine) had a recent article on settin up a shop for $5,000. That probably sounds like a lot of money, and it is, but the cost of tools, clamps etc. add up. I also found tremendous help by lurking on a now deceased woodworking forum "Badger Pond", and now learn new things every day from the experienced and generous folk at WoodCentral.

I have found woodworking to be a great hobby as many of the same tools you will need, are also very, very useful for home improvement projects - something you might find attractive as you settle into your new home.

Hope this helps a little, and be sure to ask more questions as time goes by.

Jim

Re: getting started

#14

JL

Re: getting started

JL

>Everyone will argue about which tools you need. That's a given. Everyone approaches their bit of woodworking differently.

IMO, you need knowledge, skills and imagination. Once you develop your skills and gain the knowledge, that will tell you which direction (power tools, hand tools, turning, etc.) that you want to go.

You are posting on this board, that is a start. Take a couple of classes, attend a couple of seminars, hang out at a woodshop. See where that takes you. Depending on where you are, you can probably find some good classes to take.

After you've built a project or two then decide which tools you might want.

My $0.02.

Re: getting started

#15

Careful of auctionitis

Kneale Brownson..Awaiting return to CO snows

>Research the items you might purchase at auctions. I've seen stuff go for MORE than retail prices when bidders get competitive. Know what you'd have to spend on new stuff so you know what not to spend in the spirit of the moment.

Re: getting started

#16

Re: adding a power cord

Kneale Brownson..Awaiting return to CO snows

>I started "woodworking" making trim for an otherwise unfinished house that went way over budget before we stopped the contractor.

My first tools were a circular saw and a sander. I made a table somewhat like Roy described except I cut a slot and a parallel dado and hung the circular saw from the bottom to use as a table saw. I made a square miter guide to slide in the dado and that setup served me for a couple years.

Just enough to develop an appetite for thousands and thousands of dollars of shop and tool investments.

Re: getting started

#17

Re: getting started

Barry Irby

>Jonathan,

I agree with those who have posted. You have to answer this question by figuring out what YOU want to do and then what tools will help you. Obviously, another factor is how much you have to spend. You can spend very little or as much as you are willing. Many of us would be happier if we could buy without regard to cost, but most of us had to make a "value" decision.

For most woodworking I agree that a good table saw is the place to start. I started with a TS, a 6" long bed jointer, a Shaper, and a drill press. Doing it again, I would probably skip the shaper and go for a big router and router table. I have a home made table that is the wing of my TS and I am pretty happy with that.

I have a ten inch contractors saw that today would be around $1500 (I think). Back in the day, I bought it for about $400. I would rather have a Sawstop, but am not in a position to spend the $4000 or 5,000 it would cost.

A turning point is my shop was the addition of a lunch box planer. No more driving to my friends house to dress stuff. It was about $500. Well worth it. I would also like to have a bigger planer with a spiral cutter head, but again, I'm not in a position to pay the big bucks.

Just as a thought, there is a group that promotes wood working in poor countries. They promote a two tool shop. A table with a portable circular saw turned upside down under it making it a table saw and a router mounted in the same table. Literally a $500 shop. A lot of fine woodworking could be done with that setup.

Re: getting started

#18

Re: getting started *LINK*

Alan S

>Popular woodworking magazine (recommended) has a column called "I can do that" which describes furniture making projects that require minimal tools. Look here

http://popularwoodworking.com/article/Build_Furniture_Without_a_Shop/

to see a description, a list of basic tools to start with, and a link to download a manual.

This list is the stuff that people probably assume you have already when you set out to collect tools for your shop, so it's a good place to look first. It's nice to know that you can do useful work with these while you watch for used machinery and keep reading. That will help you make good choices as you go along.


I can do that