Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Sandpaper recommendations?

Posts

Sandpaper recommendations?

#1

Sandpaper recommendations?

Joe Pack

>I do a lot of turning, particularly small items (pens, keychains, stoppers, etc.) I have been using, and have been satisfied with, Norton 3X that I bought at a great price at a Rockler store. My supply is just about used up, the great price is no more. So, I am looking for another good price on Norton 3x (can't seem to find one) or for recommendations for a different paper.

I use mainly 120, 180, 240, 320, but sometimes use a bit coarser or finer if needed. I cut my sheets into strips about 1" wide (found this to be much cheaper than buying in roles so far, but rolls are okay too if they are economical).

Can you recommend a sandpaper equal to or better than the Norton 3x, especially one I can buy at a very good price?

Re: Sandpaper recommendations?

#2

Re: Sandpaper recommendations?

Charles Yawn

>Joe, I like Norton 3x also. Around here (Duluth, Gawja), it is sold by Home Depot. You can also find various sources by doing a search on the Internet.

Charles

Re: Sandpaper recommendations?

#3

Re: Sandpaper recommendations?

Clint Searl, at the base of Haycock Mtn

>3X is the best I've found. IMO the cost of sandpaper is such a small share of the project, the price is irrelevant.

Clint

Re: Sandpaper recommendations?

#4

Re: Sandpaper recommendations?

DaleLenz

>Hi Joe,

For years now, I've been purchasing my sandpaper on ebay. I try to purchase name-brands, usually get it for a far better price than from the paint stores of near 1 dollars per sheet. Got 50 sheets/sleeve, 320 grit of a German made Sp, coming in the mail as we "speak" for 19 dollars to my door, < 0.40 cents per sheet. Have puchased no name brand sandpaper and could of been better. I consider 3M a very safe buy, but you will pay more. If I'm paying too much for sandpaper by not looking at the big box stores let me know, don't usually shop there.

Re: Sandpaper recommendations?

#5

Re: Sandpaper recommendations?

Glenn Madsen near San Francisco

>One of the best deals in turning is the Klingspor Bargain Boxes, sold in their website/catalog. $10 buys a box of roll ends in either heavy grit or finer grit, IIRC. I bought a box of that, and a similar box of rolls with velcro backing on it, when I bought a lathe 4 or 5 years ago.

There's enough in there to last for almost forever...

Re: Sandpaper recommendations?

#6

Re: Sandpaper recommendations? *LINK*

Bill Earl

>I like the Norton 3x too. A little goes a long way.

Home Depot carries a limited selection of grits at a decent price. "The Best Things" sells bulk packs of 50 & 100 sheets for better price per sheet.


The Best Things

Re: Sandpaper recommendations?

#7

Re: Sandpaper recommendations?

Fred Davis

>A sleeve of sandpaper contains 100 sheets.

If you have gotten a true sleeve for the price you quoted , there would be a stampede.

FredD

Re: Sandpaper recommendations?

#8

Re: Sandpaper recommendations?

DaleLenz

>Fred,

I've been purchasing Sleeves of sandpaper for over 25 years. Seems often they sell a "sleeve" with 50 or 100 sheets, buyer beware, easier to figure cost in my head with 100 sheets. Anyway I did say 50 sheets.

Re: Sandpaper recommendations?

#9

a better choice

Bill Tindall, E.TN

>Klingspor sells a flex back cloth abrasive called "J-Flex". I get trimmings at the store for $2/lb but it can be ordered from their industrial supply division. It lasts times longer than paper based sand paper for lathe sanding.

Re: Sandpaper recommendations?

#10

Re: Sandpaper recommendations?

Fred Davis

>I know that you understand sandpaper Dale , it just struck me like a recurring conversation I have with any hardware store you care to name.

Ask for a sleeve of say 150 grit Aluminum Oxides , C weight paper and they say " all we have is in packages"

How many in the package?

They say anywhere from 5 to 25 depending on the store , some with mixed grits.

I say a sleeve is 100 sheets, they say oh, we wouldn't .have that many.

Well could you order some?

Let me get the manager, they say .

Depending on which end of the day it is , I may or not order some.

Which reminds me I am down to my last sheet of 150.. ;-((

FredD