Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Flap Sander for Jet 10" sander/buffer

Posts

Flap Sander for Jet 10" sander/buffer

#1

Flap Sander for Jet 10" sander/buffer

Edward L. Clark

>I own a Jet 10" 1HP Sander/Buffer such as those seen in many Woodcraft stores. This is a fine machine but unfortunately Jet has discontinued nearly all the sanding accessories for it. I use mine to finish sand the small toys that I make for handicapped and disadvantaged children. I am a member of 2 Toymakers clubs in the Tampa area and the flap wheel sander improves greatly my production of these toys here in my shop in No.Carolina, my summer residence. I've tried to locate some of these and the only source so far is Klingspor, But these flap wheels are expendable as the abrasive wears off and they want $90.00 each for them. Jet wheels sold for about $40.00 and even that is a lot for what amounts to a handful of sheets of sandpaper. Someone, hopefully, has a better source for these wheels. If you can help please send an email to my above address.

Thank you so much.

Re: Flap Sander for Jet 10" sander/buffer

#2

Re: Flap Sander for Jet 10" sander/buffer

Doug Ridley

>Google up Sand-o-Flex flap sander

Re: Flap Sander for Jet 10" sander/buffer

#3

Re: Flap Sander for Jet 10" sander/buffer

John Luke

>Also google sand-rite

I have several of these with different grits on a Jet machine.

Pricy, but worth it in the long run.

Re: Flap Sander for Jet 10" sander/buffer

#4

Re: Flap Sander for Jet 10" sander/buffer

Edward L. Clark

>Thanks to all for the info. I will check them out tomorrow

Ed