Re: Furnace/Duct design
Mark Mandell - Gone Round In Jersey
>Barry,
Not-fa-nuthin', but I strongly urge you to have the system designed by a well-trained tech or ME, preferably using a CAD program, with full specs on the structure. I've seen any number of systems put in by contractors who know "A-B-C" but have no clue that "R-S-T" and the other letters even exist. The results are inefficient systems, either under sized or way over sized, that don't function properly, can't be balanced, are costly to run, and are objects of derision by the homeowner.
I bought a "custom built" house, but the HVAC is an abortion. In the first year I took down and reset all the main ductwork in the basement, but I couldn't have the system redesigned without taking down a whole lot of sh**trock. I was able to reduce energy use by about 15%, but it's still a cobbled system full of compromises.