Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Old Dresser repair

Posts

Old Dresser repair

#1

Old Dresser repair

Dustmaker Mike

>I might really get to do some woodworking this weekend. We have an old dresser that the veneer is starting to peel and crack. I am not sure of the finish on it. I am thinking that the veneer is glued down with a Hide Glue. The veneer is a birds eye maple if that matters.

So here goes

Can I use a steam iron on high stem on a towel to reactivate the hide glue? Or do I have to peal it up and reglue it? It does not appear to be dirty under the veneer.

Re: Old Dresser repair

#2

Re: Old Dresser repair

Bob Lemon - Sacramento, CA

>Mike, If you are lucky and they did use hide glue and have not applied Pledge or Liquid Gold or any product containing silicone, you can try injecting a little liquid hide from a syringe under the veneer. Let it sit for a few minutes to soften both the veneer and glue then clamp it down.

Application of a hot iron will cause hide glue to foam and boil, just like gorilla glue. A warm iron on a damp towel will help to reactivate the old glue, but it won't help the finish.

Good luck.

Re: Old Dresser repair

#3

Re: Old Dresser repair

steve mackay

>Mr. Low Tech here. I've always shot yellow glue underneath with a syringe. Cover with celophane (used to use cigarette pack wraper but now microwave popcorn wrapper [drive-by gloat])and cramp or weight down.