advice on planer head
david in indy
>I have a Delta 15" planer that has worked fine until recently. Fortunately it's still under the 5 year warranty (actually expired today) and the authorized Delta repair shop has come out and inspected it and advised me they will be replacing the entire cutting head, motor and v-belts - which is great. I had been considering replacing the head with a Byrd Shelix as I have with my jointer - but I found the propsect of the planer change out too daunting. Anyway, I got the Byrd head and after initially telling me they would install it instead of the Delta replacement, they changed their mind. Said they couldn't guarantee the completeion of the warranty work - which I can understand - to a point. The Byrd head should work perfectly fine and not cause any problems itself. The tech who is coming out to do the work says he has never worked on this machine - this is the Dewalt repair center that has now taken on Delta. My choices are: (1) send the Byrd head back and live with blade-changing; (2) take the planer apart myself and replace the head right after they put it back together; or (3) see if I can't persuade the tech in person to let me put the head in while it's apart. The problem with (2) or (3) is I lose the warranty on the warranty work. Given the lack of the tech's experience, I may well need it to make sure he does the job correctly. Any other thoughts?



