Last Deck Board Down
Dustmaker Mike
>well almost. I have to put the facing board on then I can put on the last board. What a project for 2 weekends and a week day. First off I added a ~14' by 14' octagon which is 7" higher then I added about 10'more in length and 5' more in width. The sub frame is all 2 x 10 the decking is all 2 x 6 I rounded over all the edges of all the decking. I have a little left to do like trim the ends then flush cut them and round them over. I have a set of stairs to add this year. Next year the railings and the bench storage areas.
OK so I used SF450 to glue down the boards then 2.5" finish nails to hold them in place. I had one board split on me and I tried to remove it. The SF450 held it tight. I had to use my router and a straight bit to cut the board on top of each joist. So I think this will hold pretty good. Time will tell.
Thanks All it was almost like real woodworking(-;







