Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

OT Garage Door

Posts

OT Garage Door

#1

OT Garage Door

Tom Rex in TX

>I'm in the market for a new garage door and I need some help.

In your opinion

1) steel or composition?

2) does insulation in door work?

3) any experience with entry door built into door?

4) if you are in the Dallas, TX area any recommendations on who to contact?

Thanks a bunch,

T Rex

Re: OT Garage Door

#2

Re: OT Garage Door *LINK*

Ken Garlock, Collin County Texas

>Good Morning Tom.

When we built in 2002, I looked for a high quality garage door will good insulation. Our garages face south and get the full impact of the sun. I decided on the Overhead Garage Door company model 490 with an R17 rating. Yes, the insulation works, it works extremely well. This time of year with the sun blasting the outside of the door you can't touch it for more than a second or two, while on the inside you could lean against the door all day. One of their offices is in the Farmers Branch area. They make them,sell them, they install them, they service them.

Also look into their garage door opener. We have two of their "Phantom" openers installed. You can carry on a low volume conversation while the opener is running.

Take a look at their website below and swing by to talk to them. You can spend more money, but you will have a hard time getting better quality.

Good Luck,

Ken


Overhead Door

Re: OT Garage Door

#3

Re: OT Garage Door

Ralph in Huntington Beach

>2) does insulation in door work? Yes, insulation does work. A garage door is a huge radiator and be it cold or heat, it'll help keep it out.

Re: OT Garage Door

#4

Overhead Doors are very nice.

Victor Parisian

>Price wise, if you are on a budget, you can buy insulating kits for doors and install them yourself. This is what I did when I bought my present home with some really cheap builder grade doors. Also buy the weather stripping kit for your door(s). I can hold 75 degrees in my shop on the hottest day.

Victor - in Hot and Humid Houston.