Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

suggestions needed

Posts

suggestions needed

#1

suggestions needed

Mike Jones in Redding, Ca.

>I am to build a "pirates treasure chest"...a large jewelry box with hump-backed lid. Building a box is no problem for me, but I sure could use some suggestions on how to build that hump-back top.

The project demands careful craftsmanship as well as overall presentation as an "authentic" old pirates booty box. I prefer to use no plywood or particle board. I have found some wrought corner and hasp hardware, and I am ready to start.

My only idea so far is to build that hump top like you would build a cedar strip canoe with slave ribs that come out after the top is secure.

Any help wopuld be appreciated.

Mike in Redding, CA

Re: suggestions needed

#2

like this?

Bill Tindall, E.TN

>If so, email me off line and I can send a series of pictures on making the dome part as taught by Will Neptune in a SAPFM class.


img

Re: suggestions needed

#3

Ellis Walentine

How about sending me the pictures?

Ellis Walentine

>...and the explanation, and we can produce it into an article that the rest of our visitors can learn from.

Ellis

Re: suggestions needed

#4

I'll get right on this request.....

Bill Tindall, E.TN

>look for it in a couple of days.

Re: suggestions needed

#5

PS

Bill Tindall, E.TN

>the secret here is cutting the "staves". Will showed how to cut them before assembly such that final shaping of the curve is minimal effort. It all in the geometry, of which Will is a whiz. Also his assembly jig made assembly convenient. It was all so neat I wanted to try it so I came up with this excuse of a toy chest to practiced his domed lid techniques.

Re: suggestions needed

#6

No, not like that.

Mike Jones in Redding, Ca.

>I think a dome top such as this...and as incorporated into the forms of old steamer trunks...would not be too tough, and there might be several approaches.

That pirates treasure chest top is more of a hump back form.

I know it wil;l help if I can find and post a picture...I see it cartoons all the time!

Re: suggestions needed

#7

Re: suggestions needed

George@Colonel's Workshop-Havertown PA

>Good Afternoon Mike,

I've built several round top chests and boxes. This is the largest. I find that it is easier to build the top first, capture its dimensions and build the bottom to match. The number and width of the staves, and the angle(s) of bevel(s) are key. A description of how I went about the design and execution of this chesdt can be found at Shop Shot #770, Cora's Treasure Trunk. Note I am holding a pint glass of amber shellac.

George


img

Re: suggestions needed

#8

Sailors

Lee Schierer - McKean, PA

>Sailors are an inventive lot and made use of the materials they had on hand to make other things they needed. Food, water and powder were all stored in barrels and kegs. I would suspect that they also made chests from damaged or salvaged kegs and barrels. The domed shape you want would be made the same way a stave for a keg or barrel would be made.

Lee

Re: suggestions needed

#10

Lee, I Am Most Partial To Kegs

George@Colonel's Workshop-Havertown PA

>

Re: suggestions needed

#11

Re: suggestions needed *LINK*

Curly Smith

>On the cover of the linked book is a "barrel-top sea chest" (click on the photo and then zoom to enlarge). Plans for the chest are in the book but the top is simply an arch with staves attached. Adjust the diameter of the barrel to adjust the hump.

The link should zoom open two windows - one for the book and an inset window that will zoom into the cover.


Barrel-top sea chest

Re: suggestions needed

#12

And I thought

Lee Schierer - McKean, PA

>Your preferred storage device was a brwon bottle....or your stomach ;0

Lee

Re: suggestions needed

#13

The latter, I'm sure

Kneale Brownson..Awaiting return to CO snows

>

Re: suggestions needed

#14

Curved end to end and front to back???

Kneale Brownson..Awaiting return to CO snows

>

Re: suggestions needed

#16

Re: No, not like that. *LINK*

Tom Pilsbury (Chicago)

>Found this on Google. Might be what you're looking for. Just a pic. No idea about construction though.


Pirate's chest

Re: suggestions needed

#17

Re:Aye, Aye!! Thanks!!

Mike Jones in Redding, Ca.

>

Re: suggestions needed

#18

Re: Good Stuff!! thanks

Mike Jones in Redding, Ca.

>

Re: suggestions needed

#19

Re: suggestions needed

Mike Jones in Redding, Ca.

>George,

Great looking chest...and a glass of amber helps with the creativity..

Great suggestions!

Thanks

Re: suggestions needed

#20

Short Term Rental Storage ,Kneal.

George@Colonel's Workshop-Havertown PA

>

Re: suggestions needed

#21

humpbacked lid

Alexander Grigoriev

>I think the chest pictured on page 131 of "Treasure chests: The legacy of extraordinary boxes" by Lon Schleining, is what you're after.

Re: suggestions needed

#22

I think I have done something similar. *LINK*

Keith Newton------WebKitFormBoundaryV6MZb+tiOpocz6

>The tops of this piece sound like what you are asking.

Before I attempt a description, I would like to hear what the dimensions of your planned project will be. L W H, and thickness of parts, arc of end, height of bulge, etc.


http://www.woodcentral.com/shots/shot728.shtml