We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
Sorry that I'm late getting this posted but I got back in from Philly late yesterday afternoon and when I crashed for sleep last night, I was so exhausted that I didn't get up until now. Disaster Recovery Exercises wear pretty hard on me these days and it's precious little sleep from start to finish and this one was only 64 hours long (continuous). After about 32 hours of work and no sleep, I get a bit punchy.
No woodworking for me this past weekend, just glad to be home and glad that this exercise is over.
I spent my weekend dowing a few woodworking things, mostly redrawing a dresser project for my daughter that I am just starting and picking through my lumber to get an idea of what goes where. I had previously done a glue up for the top(1 inch thick by 68x21 inches)so I hand planed it flat with my jointer and panel planes.
Went to Midnight Madness in Oakville on Friday night, it was a lot of fun, they estimated over 100,000 were there.
>Last week was the annual Art Fair here in Ann Arbor Michigan. I usually take a day's extended lunch hour to roam the streets in search of wood artists-whether they be turners, furniture makers or sculptors. This year I passed over all exhibitors and headed straight to the University of Michigan Museum of Art. My goal was not to see the various exhibits but rather the new case work that supports many of the items and exhibits found in the Museum. The Museum has nearly doubled it's capacity with a large addition that opened within the last year. One of Wood Centrals own- Andy Lincoln-works for the firm that received the contract to build the display cases and other related support pieces.
I was able to take pictures inside the museum provided I did not use a flash-thus many of the crisp details in the case work are not really as evident as I would like. Still I think you'll get an idea of the quality of work "exhibited" here.
The entryway to the older section of the museum has this reception desk made from walnut.
This is a very clean 45 degree joint of solid walnut.
The case work that supports various exhibits is either walnut or painted -white- Poplar? The bases vary in size and function but all contain a consistent clever design theme. The legs have a tapered chamfer on one side and mounted in opposing attitudes.
In darker halls the contoured lines tend to fade yielding lags that appear very different from each other.
Some of the cases have panels that follow the legs to the floor.
Here the opposing legs give a sense that the panel is floating away from the structure.
Here are some other cases:
I saw an item of personal interest in one of the exhibit wings. It was a Steinway piano. Model B Art Case- Grand Piano Colonial Sketch 336 Style built in 1930
Here is the museum's write-up of this particular instrument
"Kitchen Piano"
On permanent loan from the University of Michigan School of Music
Gift of Nancy Gould Britz in memory of Elizabeth Gould Hochman (1904-1995) Class of 1926
Although a thoroughly modern piano in it's internal structure and sound, this Art-Case instrument varies only slightly from the design of the first forte piano built by Heinrich Steinway(later Henry Steinway) in Sessen,Germany, in 1839. Steinway and Sons Art-Case pianos,especially popular in wealthy American households in the later19th and early 20th centuries, combined fine furniture craftsmanship in the European tradition with iron frame technologies, an American innovation. This extraordinary instrument is notable both for the restrained elegance of it's woodwork and it's squared front, more like that of a harpsichord than like the cutaway profile of most grand pianos.
This piano is sometimes referred to as "the Kitchen Piano" because the first model of this type was built by Steinway in his Kitchen in Germany.
Restored with vintage parts under the direction of Robert Grijalva of the School of Music Department of Piano Technology, the Elizabeth Gould Hochman piano comes to the Museum of Art in its 50th anniversary year in support and celebration of th4e confluence of the arts at the University of Michigan.
I particularly liked the faceted art-deco styled legs:
It's always a treat to see excellent woodworking-especially when it's right in your own back yard. Thanks Andy for the work you and your colleagues did on the display cases.
I encourage folks to check out available museums in your area. You never know what gems are waiting for you to discover.
Happy that your trip here was successful. Perhaps next time we can hook up. Our weekend was a blizzard of activity, as our #2 daughter and family visited for an overnight. I had to repair a bed in the guest room which meant mortising ends of two rails for new hardware. PITA, but its over now. I was also able to help #7 son install the mattress frame on the head and footboards of our new bed. Thus concludes the Master Bedroom Suite, a project which has eaten up the better part of two years. It felt great to go to sleep in it for the first time.
When Jim and I finished doing that, I put the finishing touches on #3 daughter's new cherry and birch ply coffee table and transported that over to her new home. Also did some praying that the warp (cup)would leave #2 daughter's dining room table so I can begin the finishing schedule. We set it outside in the heat of the sun with concave side down. It helped, but the humidity is fighting me at every turn. The damn thing is too big to bring back into the shop, so it must remnain in a high humidity area of our screened in back porch. One thing for sure: its the last large table I'll ever do at this location.
Thanks for posting this and taking such good pictures.I was usually under the gun while there on the install and have not had a chance to go back and see things in their natural setting.I also cannot take full credit there were a few other guys in the shop who built some of the casework,the legs were all milled on a CNC in house and our paintshop guys did all the finishing.It truly was a team effort to put this project together.
There is also a gift shop in the museum that sells various works of art in wood,among other things. The novelty/genius of this is that when they were preparing the site for construction they removed a couple old,large trees.They had the trees milled into lumber and turning blanks,from there it was sent to various artisans across the country and the wood gifts that are for sale are what was made from those two trees.
What I now need is a motor,a stand, achuck,pen mandrel,faceplate,live center,face mask,etc. as well as some instruction/education.I have never done any turning and thought
this might be a way to start.I only have $20 invested in this at the
moment but I am guessing it is a slippery slope just like handtools/flatwork.
Also this weekend I sold my first infill plane kit.It was exactly the same as the plane kit I had put on the benefit auction page a few months ago that Craig D. bought,assembled and did a fantastic job on.
Below is a link to his post on the Hand Tools board showing the finished product.Also a search will bring up his posts on assembly and such as well as a link to where he blogged it all out.
Now I am off to learn to replace the knives in my jointer.
>The only woodworking related event was that I was finally able to ship a set of 8 Greene and Greene chairs to their new home. There is no way a full size semi will fit down my drive so I meet them in redding Ca which is really easy for both of us the only drawback is that it was 108 at 6pm and not starting to cool off, I much prefer the mountains, doesn't get as hot and when it does it's later in the day and cools off much sooner.
Saturday morning was mostly mowing around the house for fire protection.
Sunday the family made a mad dash to the bay area to see a soccer game between Inter-Milan and Teamamerica which is from Mexico City. Half the time was spent watching TeamAmerica's fans which was probably 2/3rds of people there. Hard to explain, lots of dancing,banners, noise and passion from their fans. The game was fun but kinda mellow since it was an exhibition.
>Yeah, when some guy from that museum called me he told me he wanted someone to "case the place". I took it the wrong way, cops got involved and well....the rest is a long story. Looks like Andy's company did a great job though. ;-)