Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

planer infeed roller problem

Posts

planer infeed roller problem

#1

planer infeed roller problem

Joe Grittani

>Greetinmgs -

I'm still happy with my DeWalt 733 12 1/2" thickness planer but have developed a problem that has me stumped. I've been planing down a bunch of 12" poplar and for some reason the infeed roller is collecting shavings/chips. My low rent dust collector, a shop vac, has always done the job for me and continues to pull chips. I've emptied it and checked the hose and dust collection hood for any obstructions that might reduce the vacuum. Nothing there. I've cleaned the roller with alcohol and within a few minutes it's loading up with chips again.

I called DeWalt and the guy I spoke to didn't have a clue - he just kept punching info into his computer and told me he couldn't find those symptoms described for that planer.

Any suggestions will be appreciated.

TIA.

Joe Grits

Re: planer infeed roller problem

#2

Re: planer infeed roller problem

Kneale Brownson..Awaiting return to CO snows

>Type of wood may be the factor involved.

Re: planer infeed roller problem

#3

Unlikely, but static electritity???

mdclor

>

Re: planer infeed roller problem

#4

Ellis Walentine

Tough one

Ellis Walentine

>If they officially don't have any history of your problem, it could be hard to get any joy on this claim. Poplar isn't normally a problem wood. I think that your shop-vac might not be up to the task. Wider boards generate much more dust and shavings through a planer. I'd upgrade to a 4" dust collection port before I'd complain to the manufacturer.

Ellis Walentine, Host

Re: planer infeed roller problem

#5

Re: planer infeed roller problem

Ron in Sterling, CT

>My shop vac won't handle the chips and dust from my 733 on a continuous basis. I took the vacuum accessory off and it works fine. I do my planing outside, so I just let the shavings fall in the wheelbarrow. Works for me. I would suggest taking the vacuum hood off and giving it a try. Lets us know what your final solution turns out to be

Ron