Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

***SURVEY: THE IDES OF JULY *** *LINK*

Posts

***SURVEY: THE IDES OF JULY *** *LINK*

#1

Ellis Walentine

***SURVEY: THE IDES OF JULY *** *LINK*

Ellis Walentine

>Well, it's time again for yet another pithy, probing question for you. If you're new to the site, you know that every two months, around the Ides of the month, we poll our readers on woodworking-related matters. Then, we edit your responses into a column that appears in Woodworker West magazine called "News & Views from WoodCentral.com." This month's Ides survey -- by the way, this one is #59, can you believe it? Goin' on ten years worth! (remind me to update the archive) -- is something that I cooked up this morning, a very simple question:

"In the rest of your life as we know it, what would you like to accomplish in woodworking?" You can discuss technical achievements you want to make, skills and abilities you want to learn, specific projects you want to accomplish, personal satisfactions you would like to gain. You can frame your answer in terms of anything relevant -- your time remaining, your budgetary or physical constraints, your wife's need for a new dining set :-), or maybe your reasons for being a woodworker, turner, carver, hand-tool expert in the first place.

For the first time, I am going to give away a hat or t-shirt to one participant chosen at random on July 24. (I can't give prizes based on the best response, because there are no good answers, just your own personal aspirations.)

So, don't hold back. What are you going to do with all this know-how and equipment you've acquired? What will your woodworking legacy be?

Prize drawing on July 24, one week from today. Be there or be square.

Cheers,

Ellis Walentine, Host


Woodworker West magazine

Re: ***SURVEY: THE IDES OF JULY *** *LINK*

#2

Dominic in Bucks County PA

Re: ***SURVEY: THE IDES OF JULY ***

Dominic in Bucks County PA

>I'd like to enhance or build on my hand tool skills.

One of the skills I NEED to develop further is the ability to saw to a line. Like many, I've become dependant on machines to cut accurately. The time I need to use a handsaw shows me just how mch improvement is needed.

In line with the above, I'd like to master dovetails. Not just through dovetails, but half blind and other varieties.

Re: ***SURVEY: THE IDES OF JULY *** *LINK*

#3

JL

Re: ***SURVEY: THE IDES OF JULY ***

JL

>"In the rest of your life as we know it, what would you like to accomplish in woodworking?" You can discuss technical achievements you want to make, skills and abilities you want to learn, specific projects you want to accomplish, personal satisfactions you would like to gain. You can frame your answer in terms of anything relevant -- your time remaining, your budgetary or physical constraints, your wife's need for a new dining set :-), or maybe your reasons for being a woodworker, turner, carver, hand-tool expert in the first place."

Not an easy question. I am reasonably comfortable in making chairs, tables and simpler pieces of furniture. I could even make a stab at a sideboard and china cabinet. I would like to make a larger piece that is more ornate. Say a wardrobe or a china cabinet. I want it to have carving (or marquetry) and really stand out.

Re: ***SURVEY: THE IDES OF JULY *** *LINK*

#4

Re: ***SURVEY: THE IDES OF JULY ***

Gerry Wittenberg in North Surrey

>I've kept a set of plans for a Roll Top Desk from before the inception of BP and have been packing around a stack of Manitoba Burr Oak from Oak Point and would like to fashion the stack into a desk before I pass on.

Gerry, who's shopless in N. Surrey.

Re: ***SURVEY: THE IDES OF JULY *** *LINK*

#5

Re: ***SURVEY: THE IDES OF JULY ***

Bruce, a MN Galoot

>My shop is a modest mixture of hand tools and power tools, not the top of the line anything (except my 2 Veritas planes and Berg chisels). However, I've made most of the furniture in our home, and before I leave this life, I'd like to furnish my kids' homes with furniture from my own hands. It's just one more way to be remembered.

Bruce Haugen

Re: ***SURVEY: THE IDES OF JULY *** *LINK*

#6

my goals...

Bill Tindall, E.TN

>I don't have any life long goals. I build what ever someone in the family needs as best as I can at the time.

Re: ***SURVEY: THE IDES OF JULY *** *LINK*

#7

Re: ***SURVEY: THE IDES OF JULY ***

Tony - Memphis

>My wife is an artist and a seamstress (hobby - sales/marketing by day) and we have this conversation a lot. I have taken classes from folks like Mack Headley, Phil Lowe, and Lonnie Bird. My wife has her own list of equal folks in art and sewing. To watch one of these talented people work is really something. The techniques I am still trying to learn, they have mastered years ago. I feel like people at that level have the ability to take the whole thing to another level. I remember when Mack Headley was showing us his studies, I was in awe. I was thinking here he is trying things at a level I'll never reach just to see what worked (design and proportion wise). I could keep rambling, but I guess where I want to be is at a level of experience and confidence (guess the experience brings the confidence) where I can then explore design, proportion, etc. An example is my current project, an 18th century tray topped tea table. Shaping the legs, making the knee block to post joint nice, fitting the skirts, etc... each of these is a major challenge for me at my current skill/experience level. So, my feeling of accomplishment is getting the thing to look halfway decent. Mack would knock out four different legs just to get the curve right (actually, he did an article for FWW many years ago on the design of a similar table). Phil might decide at the last minute to add scrolls on the legs and just wing those. For me, cutting a $50 curly maple leg blank made me nervous as heck! I did make a poplar blank to check my pattern. Anyway, I hope this makes sense. As a weekend warrior (and a few evenings), it will be a long time, if ever,I get there, but I'm having a good time learning and getting there.

Sorry for the ramble!

Tony

Oh, here is what the tea table looks like right now...I think the box there next to it of scraps and cutoffs weighs more than the table!


img

Re: ***SURVEY: THE IDES OF JULY *** *LINK*

#8

Re: ***SURVEY: THE IDES OF JULY ***

Hank Knight

>I went to a small college in Danville Kentucky called Centre College. I rented a room from a wonderful Southern Grande Dame named Isabel Kinnard. Her grandfather (I think it was) had been the President of the college years before, and Ms. Kinnard had his desk. It was a wonderful black walnut slant top in a traitional, very simple Kentucky style with French feet. It was the prize piece in her home that was furnished throughout with original Kentucky antiques she had collected over almost seventy years. She gave me my appreciation for beautiful furniture, and my ambition is someday to build that desk.

Hank

Re: ***SURVEY: THE IDES OF JULY *** *LINK*

#9

Centre College

Michael Bush

>Hank,

My wife went to Centre, class of 1982. You don't run into Centre graduates every day. Great to see it mentioned here!

Re: ***SURVEY: THE IDES OF JULY *** *LINK*

#10

Re: ***SURVEY: THE IDES OF JULY ***

Ken Oakley-Sunny St. Cloud, Fla.

>After nearly 70 years of woodworking I have hopes of leaving this life with all the fingers I was born with.

Re: ***SURVEY: THE IDES OF JULY *** *LINK*

#11

Re: ***SURVEY: THE IDES OF JULY ***

Scott Greaves in Blackfoot Idaho

>I know this is probably just wishful thinking, but I would like to clean my shop!

Naawwww, ain't gonna happen!

Scott.

Re: ***SURVEY: THE IDES OF JULY *** *LINK*

#12

Re: ***SURVEY: THE IDES OF JULY ***

Jay St. Peter - SoMD

>My goal with woodworking is not to have too many goals, so it remains fun. But, I'd like to continue to learn better design and new skills with each project. Future plans include: turning, slab top table(s), chairs, inlay, and maybe a major project built only with hand tools.

One of the things I'd like to do in life is build my own house. From design, to renting a dozer, all the way to paint with minimal help. This includes making my own vanities and cabinets, as well as much of the furniture for the house. Then, of course, use the garage to build my own car ... but that leads away from woodworking ;).

Jay

Re: ***SURVEY: THE IDES OF JULY *** *LINK*

#13

Re: ***SURVEY: THE IDES OF JULY ***

Brian in Brighton

>In the remaining years I have I would like to have the free time to invest in a quality, dedicated woodworking program from one of the nations best schools. Being a small business owner affords me little time to take 1-2 weeks, or a few months, off and really dig into the meat and potatos of woodworking. It would be wonderful to take classes taught by some of the best in the business. Not to make it a business though. I would never want to turn woodworking from something I want to do into something I have to do.

To learn enough aspects of the woodworking world to be able to understand the complexities of building any piece of furniture my wife desires and tell her how I just don't have time for it :-)

Re: ***SURVEY: THE IDES OF JULY *** *LINK*

#14

Re: ***SURVEY: THE IDES OF JULY ***

Robby Wright in San Marcos, CA

>Good question, Ellis, and a tough one to answer. I do woodworking because I enjoy it, not because I have to. I enjoy creating things - maybe it is the legacy of my last name, which means "builder" or "maker", as in housewright, wheelwright, cartwright, etc. I really enjoy the creative process, figuring out new ways to do things (at least new for me, even though the methods are very old), and figuring out the processes that go into making something. I don't really enjoy the smearing on of the finish, and some projects end there, but the rest if fun.

In the future, I want to get good enough at the process that it is more relaxing. Once I retire, which I hope to do in the next ten years, I want to enjoy puttering around the shop and building things just for the joy of it.

I suppose that I should also include my enjoyment in shop improvements. I have caught myself recently wondering if I get a bigger charge out of shop improvements than I do out of making things. Maybe it is just a stage, but right now, the majority of the woodworking I have been doing is related to shop improvements.

Robby W.

Re: ***SURVEY: THE IDES OF JULY *** *LINK*

#15

Re: ***SURVEY: THE IDES OF JULY ***

Barry Irby

>When I was young my goals were graduate high school, then college, Get married, have kids, and ......

I've done those things. I'm 60 now and I started buying major tools when I was about 16. Graduated HS and College, got married (and divorced), have a couple of great kids and now at the other end of my life I find I am lacking a goal. My shop is better than it has ever been and I still do wood working for fun and profit, but It sure would be nice to have a goal. I've been thinking about that for a while. My goal is to get a goal.

Re: ***SURVEY: THE IDES OF JULY *** *LINK*

#16

and PS, I could use a hat.

Barry Irby

>

Re: ***SURVEY: THE IDES OF JULY *** *LINK*

#17

Re: ***SURVEY: THE IDES OF JULY ***

Stuart Hough

>Of all the things I have tried...all the hobbies I have taken up but never gone anywhere with...all the big aspriations unfulfilled...I have finally distilled my hopes and dreams down to the essence of my needs. I just want to be good enough at this craft to create a project that causes a state of dumbfounded shock, silence and awe from my wife, with the only discernable sound heard being a quiet, low, barely whispered "WOW!" That will be my Golden Moment!

Re: ***SURVEY: THE IDES OF JULY *** *LINK*

#18

Re: ***SURVEY: THE IDES OF JULY ***

Marv

>Hi Stuart,

Now that's the best goal I've heard so far. You deserve a hat for that one.

Howz that little saw working for you?

Marv

Re: ***SURVEY: THE IDES OF JULY *** *LINK*

#19

Re: ***SURVEY: THE IDES OF JULY ***

Marv

>This might seem strange to some, but I have reached many goals that I set for myself in years past. I'm now enjoying the rewards from those goals. One of those goals was to build a shop and fill it with tools, lots of tools and machines. Even though I don't use my shop everyday, it's nice just to know it's there.

If I were to say I have a goal it would be to maintain my good health so I can continue enjoying each day as it comes and goes. I pretty much live according to my moods. When I have the desire to build something, I do. I do it until the mood passes, then I do something else. I might have 3 or 5 unfinished projects in process at the same time. They eventually get completed, but by then there will be several other projects that have sprouted up.

That's pretty much the way it will be until blood is no longer being pumped through my veins.

Marv

Re: ***SURVEY: THE IDES OF JULY *** *LINK*

#20

Re: ***SURVEY: THE IDES OF JULY ***

jerryburns

>Finish my moris chair build a blanket chest with hand cut dovetails (I got the stock just need to get flat and square ) build a bigger shop learn how to turn wood build a bigger shop keep my chisles sharp

Re: ***SURVEY: THE IDES OF JULY *** *LINK*

#21

Re: ***SURVEY: THE IDES OF JULY ***

Kneale Brownson..Awaiting return to CO snows

>I want to make something as unique and beautiful as, say, a piece by HC Sakman.

Re: ***SURVEY: THE IDES OF JULY *** *LINK*

#22

Re: ***SURVEY: THE IDES OF JULY ***

Stuart Hough

>Marv, I started to do a few test cuts, but experienced Saw-tus Interruptus. I got a call from the wife to drop what was doing and come in for dinner. I tried to obey, but there is NO WAY that I would drop that beautiful little saw! I did , however, go in to eat a fine meal! The few cuts I actually made felt like silk! It leaves a very nice edge behind. I can't wait to get started on her blanket chest with all those hand-cut DT's!

Re: ***SURVEY: THE IDES OF JULY *** *LINK*

#23

Re: ***SURVEY: THE IDES OF JULY ***

wilbur

>This is not really an accomplishment, but my only goal in woodworking is to have fun with it.

Re: ***SURVEY: THE IDES OF JULY *** *LINK*

#24

Re: Centre College

Hank Knight

>Micghael,

It sounds like your wife was there between my family members. My wife graduated in '66, I graduated in '70 after a stint in the Army, and my daughter graduated in '02. We're all big Centre fans, as you can probably tell. Its a wonderful school.

Re: ***SURVEY: THE IDES OF JULY *** *LINK*

#25

Re: ***SURVEY: THE IDES OF JULY ***

Michael Bush

>I want to have, and have given to family members, several pieces of furniture that you'd have to carbon date the wood to find out they weren't made in the C18.