Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

OT Wireless repeaters/range extenders

Posts

OT Wireless repeaters/range extenders

#1

OT Wireless repeaters/range extenders

Andy Lincoln,in Dearborn,MI

>Hi All,

As part of learning what an Itouch can do(I "share" one with my 12 year old son) I have found an app that allows me to listen to streaming audio/radio via WiFi.I can now listen to one of my favorite stations,KROQ in Los Angeles while being out in the shop.My wireless signal,Linysys wireless N router,isn't super strong and I lose signal alot. I would like to know some of the methods to improve signal.

It isn't more than 75 ft from house to shop but a couple walls and a tree are right in the line of sight.when I upgraded the electrical in the shop I installed network cable but as of right now I have no way to crimp the proper ends on,no available port in my router,and the Itouch doesn't use net cable anyhow,and I would think that a wireless repeater/signal booster should be cheaper than a dedicated computer in the shop.And if I had a full blown computer set up I would spend even more time on WoodCentral and I'd NEVER get anything done.

Thanks,

Andy

Re: OT Wireless repeaters/range extenders

#2

Re: OT Wireless repeaters/range extenders

Dave Paine

>A quick google for "wireless N repeater Linksys" shows many people have asked the same question. It does not seem Linksys has an "N" repeater, but they do have a "G" repeater, which should work and for streaming radio the lower bandwidth should be more than adequate. I would go to the Linksys site to see the products available.

Another option is to install a "bridge" or "access point". Linksys sells an "N" WAP400N model.

Unlike a router, the bridge or access point does not create the ID address (this is what the router does. It merely transmits and receives between this unit and router. Typically these units have 3 or 4 ethernet sockets on the back.

I have Dlink "N" router and recently purchased a Dlink "N" wireless bridge/access point so that I could get internet access to my HD TV. My arrangement is only 20 ft away, but two walls and a brick fireplace. Good signal.

Sometimes a more sensitive listening device can be more efficient than increasing transmission or repeating.

Re: OT Wireless repeaters/range extenders

#3

Re: OT Wireless repeaters/range extenders

Gary Evans Tallassee, TN

>Hi Andy,

I'm pretty sure that Linksys has an upgraded antenna set for their wireless routers. That might be an inexpensive option for your application.

Gary

Re: OT Wireless repeaters/range extenders

#4

Re: OT Wireless repeaters/range extenders

Curly Smith

>Use the Cat5 cable that you installed as your range extender. Buy another wireless router, connect it to the first router via the network cable and install then new router as an access point in your shop.

Some info that might be useful: use a Wireless Cable/DSL Router as a Switch with an Access Point

The above article says "Plug the Wireless Router to the main Router. Regular Port to Regular Port, using crossover cable (or straight patch if one port is an Uplink)." but check your modem specs because it may, and probably does, support auto-crossover which means you won't need a special cable.