Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Going to the "Beech"

Posts

Going to the "Beech"

#1

Going to the "Beech"

Andy Lincoln,in Dearborn,MI

>Hi All,

As part of my whirlwind cleaning and rearranging extravaganva I was able to recycle an engineered beech floor into a new shop floor for nearly 200 sqft of my shop.The flooring came as removed/replaced material on an autoshow set and had been sitting in storage for a couple years waiting for my round tuit.

From Recent work

Being used material some of the tongue and groove/locking mechanisms were cut-off removed,etc.So alittle glue,a couple pinch dogs,and one really good dog later(along with an 8 lb finishing hammer) I got teh floor laid in my main work area.

From Recent work
.

Of course it was very hot and humid today and I turned the news on this afternoon and it is going to be a cool,mild 71 degrees..tomorrow,DOH!

Andy

Re: Going to the "Beech"

#2

JL

Isn't it nice to have such a good supervisor?

JL

>Or is that the QC inspector?