Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Gate making and tree felling fun!

Posts

Gate making and tree felling fun!

#1

Gate making and tree felling fun!

Stephen Kirk in Quakertown PA

>Ah, nothing like finally getting a weekend in which I can do some woodworking again. My wife and I are making gates to close up our dry lot. We're using 2x4s as the rails and I got some green 3x3 pine posts from a local lumber mill. We cleaned up the 2x4s, cut them to length and formed tenons on the end. Couldn't flatten the green 3x3s (yuck, that'd muck up the cutters) so we just layed out the mortises and then used the mortiser to do those - it didn't seem to mind the green wood. Everything went together pretty well. We'll pre-finish the rails and the tenons and then drawbore all the M&T joints, so as the green posts dry they should keep getting tighter. Been a fun project.

Also helpded by neighbor take down a dead maple. He asked me if I wanted the tree, so I said lets wait and see what it looks like when it's down. Totally rotted center a few feet up, but then completely solid. Plus, it looks like it'll be spalted. So, I'm already arranging to have someone get the logs and take them to the mill. Give them another year or so and they should look good.

Re: Gate making and tree felling fun!

#2

Re: Gate making and tree felling fun!

Michael Bush

>The center isn't the part you want anyway. Maple is different from every other tree I know of in that the sap is the good part.

But spalting is always good!