Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

>13 Jul 2009

Good Morning,

Looks like we are getting rain today with some storm in the state. That's fine as we need the rain and....it helps the temps to stay cooler.

Been working on 2 cupcake stands for a friends wedding gift. My youngest son has been helping me and I've been taking that opportunity to just teach him about woodworking and how to figure stuff out along the way for these projects that have no plans to go by.

If anyone knows where I can get some small sheets of birdseye maple veneer, say about 12" by 12" or something like that, I'd appreciate the pointer to where.

It's felt really good to spend time in the shop doing woodworking, but it sure has been hot.! Played bass at church yesterday and watched a movie with the family last night.

Veggies are starting to be harvested in our two garden spots. It's been really tasty to have fresh out of the garden food on the table.

Well, that's it for me...so what did YOU do over this past weekend?

Best of weeks to you all.

Dennis

Re: WC Weekend Accomplishments....

#2

Ellis Walentine

Not much

Ellis Walentine

>It was a busy one here, Dennis, but relatively unambitious. We had dinner at my daughter's house Friday night, did outside work in the yard and flower garden on Saturday morning, then headed over to a late afternoon party at a friend's house. Yesterday, we got together with a bunch of folks to support an old friend who was just diagnosed with cancer. We're all praying for his recovery.

Today, it's back to business.

Ellis

Re: WC Weekend Accomplishments....

#3

Started Early

Mark Mandell - Gone Round In Jersey

>Took half of Friday off and got the first 3 gals of stain/finish on the front deck and walk. Couldn't find my pads so 4 hours on hands n' knees with a 6" brush didn't do me a whole lot of good. Walk looks nice though.

Had hoped to get the rest of the decking (back) done on Sat. but rain was too close for no-risk application. Instead I gutted the garage and built new shelving to make room to move the lathe up from the basement. SWMBO takes a look and says "This would be a good time to paint the garage, right?" Half the walls' height is the original poured concrete surface with bits of wood stuck to them from the forms; should be a whole lotta fun prepping. I hate painting.

Did have some fun experimenting to make my Stubby 1000 hovercraft. Tried several configurations of shop-made flotation pads. Can now lift the 900 lb Stubby with 80 PSI which will be essential for moving the lathe out of its parking spot to work in the garage. Next I have to run the GFCI lines for 220 and 110 out to the garage which now only has one GFCI duplex, then to clean, etch, and seal the garage floor for the air lift to work best.

I figure the pain will be about gone by next weekend.

Re: WC Weekend Accomplishments....

#4

Re: WC Weekend Accomplishments...(with PIX).

Andy Lincoln,in Dearborn,MI

>Dennis,

I spent a portion of the weekend finishing up the details on my outdoor kitchen.

From Recent work

The exposed wood is cedar with Cabot's Australian Oil sprayed on as the finish.The work surface is tiled to match my hot tub project from a couple summers ago.I have running water,a small workspace and a 4-burner propane cooktop.

From Recent work


The outdoor kitchen is just a quick turn around from my BBQ grill

and it makes cooking an entire meal very convienent,no more running

into the house to check on something on the stove or to wash/rinse foods and hands.

I also was able to get a somewhat decent photo of my new porch light,while lit,in the evening.I think it does a great job of illuminating the address plaque and the porch in general.

From Recent work

Now to get the shop clean and ready for 150 bdft of White Oak to make some Morris chairs from.

Tanks for looking,

Andy

Re: WC Weekend Accomplishments....

#5

Re: WC Weekend Accomplishments....

George@Colonel's Workshop-Havertown PA

>Happy Monday Dennis,

Shop time was productive, though limited. I was able to assemble my #3 daughter's new cherry/birch ply coffee table which used up much of my scrap cherry. After a sanding trip to the back yard picnic table, #7 son rerturned it to the shop where I've been wiping on satin poly/naptha mix. Its beginning to look prettty. Scrap cherry =lots of character which somehow was excluded from previous furniture items--I think you know what I mean!

The kids scheduled the annual "Dart BBQ" for Saturday night. Now its mostly for their friends who are also getting more mature. So the noise level was diminished and everybody left by 2AM. They had about 50 people. Wonder of wonders: they bought all the food and beer and cleaned up afterwards. My #5 son Steve drove all the cans and beer bottles to the township recycling facility before 0900 Sunday morning. All the left over beverage is in my shop icebox. Great party. Later on Sunday we had other kids/grandkids drop in for a continuation of the previous day's fun. But when it was over, they scattered to the four windds and we were left alone in blessed quiet.

The only thing we could hear were the tomatoes ripening.

George

Re: WC Weekend Accomplishments....

#6

You Must Have The Secret

Mark Mandell - Gone Round In Jersey

>to ripening tomatoes, right, George?

Re: WC Weekend Accomplishments....

#7

Ellis Walentine

You're a wild man

Ellis Walentine

>If I got as much done around the house as you do, I'd have enough points saved up to retire tomorrow. Nice job, Andy. Don't let my wife see that outdoor kitchen setup. All she wants is a cabinet to hide the dog food and the charcoal. :-)

Ellis

Re: WC Weekend Accomplishments....

#8

Re: You're a wild man

Andy Lincoln,in Dearborn,MI

>Ellis,

There is an email headed for Candy's inbox right now.

If you want I'll send the CAD plans along too :-P

just yanking your chain,

Andy

Re: WC Weekend Accomplishments....

#9

Alan Young

Andy- Excellent work on the Kitchen!

Alan Young

>

Re: WC Weekend Accomplishments....

#10

demolition

Simon St.Laurent - Dryden, NY

>eventually I'll have a shop again, but for now I'm just tearing apart old shelving and cabinetry that blocks the concrete foundation wall that needs replacing. It's nice to dream of a shop without water running through it, and maybe by September...

Re: WC Weekend Accomplishments....

#11

Hold On - Go With The Flow

Mark Mandell - Gone Round In Jersey

>Cut a channel to take the water across the floor, then stock it with trout and stone slab bridges.

Take a break and catch a fish.

It'll be the Frank Lloyd Wright Wood Shop a/k/a "Falling Water Studio"

[Good Luck with the remedy. Heavy duty sump?]

Re: WC Weekend Accomplishments....

#12

Re: Hold On - Go With The Flow

Simon St.Laurent - Dryden, NY

>The main problem is that the drainage for the back (uphill) wall failed long ago. Water is theoretically supposed to flow into the channel along the back and sidewalls to the outlet pipe, but doesn't, except around where the well pipe comes through. So the concrete wall is getting crushed to dust. 80 years of water pressure is enough, I guess.

On top of that, the outlet pipe jammed last year, and while we did manage to get it cleared, the repair guy figured it wouldn't last much longer anyway.

Lots of work, but I've postponed it long enough. There are salamanders down there who'll be upset with me, but there isn't enough water for trout!

Re: WC Weekend Accomplishments....

#13

Sounds Like More

Mark Mandell - Gone Round In Jersey

>Step One: Build swail on the uphill to interrupt and rechannel the sheet-flow around the structure. Excavate the exterior walls for repair, sealing, and install of proper drain tile system. If you don't take the hydrostatic pressure off those walls, everything else is a bandaid.

Step Two: Install under-slab drainage to a powered sump, fill the French drain (huge source of radon and mold spores), and seal the up-hill walls.

Big job, but that's how we'd do it here.

Good luck