Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Lumber Pricing RANT!!

Posts

Lumber Pricing RANT!!

#1

Lumber Pricing RANT!!

Andy Lincoln,in Dearborn,MI

>Hi All,

Am I being overly sensitve to this or not?

Recently I got a quote for some lumber for my outdoor furniture project from a local supplier.I had given a cutlist/rough dimensions

to provide my supplier with information on the nominal width,length,thicknesses needed.The material is White Oak.

What I would like to know is why when pricing by the board foot the cost for the material goes up incrementally by the thickness?

Shouldn't 1 board foot of material cost the same?

I wasn't asking for extreme thickness,nor width either8/4,6/4 and 4/4 by 7" width+/-.

The 8/4 is $7.00 bd/ft 6/4 is $6.00 bdft and 4/4 is $4.25 bdft.

Thanks,

Andy

Re: Lumber Pricing RANT!!

#2

Re: Lumber Pricing RANT!!

Henry (Raleigh NC)

>Andy -

I do not know, but I always thought it was because it would take longer to dry an 8/4 board than a 4/4 board. The raw cost of materials is similar, but the processing time (and costs) would be increased for thicker boards.

Henry

Re: Lumber Pricing RANT!!

#3

Lee Grindinger

Sawmill yield, special handling and longer drying

Lee Grindinger

>You cannot simply saw logs into thicker slabs if you're after maximum yield, it takes larger boles to make thicker lumber so there simply are not as many logs available for the thicker stuff.

There is less of it and this increases handling costs.

It takes longer to dry thicker lumber so there is more cost there.

It all adds up.

Re: Lumber Pricing RANT!!

#4

Jesper, Denmark

Re: Lumber Pricing RANT!!

Jesper, Denmark

>Thisker lumber is always more expensive per bdft.

Quartersaw also more expensive than riftsawn.

Lee explained why.

Re: Lumber Pricing RANT!!

#5

Re: Lumber Pricing RANT!!

John Veerkamp, Western Mo

>One other factor is volume. More demand for 4/4 so more is available so the price is cheaper.

Re: Lumber Pricing RANT!!

#6

Yes, and here are the numbers to show why

Bill Tindall, E.TN

>I grabbed an old market reporter so while the numbers are not current they are illustrative. The numbers will be for the top grade of white oak.

White oak, FOB mill, not dried. 4/4 $1150/1000bdft 8/4 $1650

So why is the 8/4 more when it takes less labor to saw it? Be sure that the mills are not able to rip off their million bdft per year customers. The answer is that lumber is graded from the worst side. A log that might have yielded one top grade 4/4 board and then a #2 common 4/4 board, would have yielded one low grade #2 common 8/4 board because one side is #2 common grade. To lessen this event larger logs are saved for sawing 8/4 lumber and larger logs cost substantially more than small logs.

NEXT:

White oak, FOB kiln 4/4- $1750 8/4- $3000

for the low #2 common grade 4/4- $725 8/4- $900

Why is dry 8/4 way more than 4/4? Oak is difficult to dry. It must be dried very slowly or it will check and honey comb. So, it takes much longer to dry 8/4 than 4/4. In addition, because it takes a long time to dry 8/4 oak, spot shortages develop for 8/4 oak and these run the price up.

Now let us compare poplar where large logs are plentiful, and it is easy to dry.

Poplar, FOB kiln 4/4- $950 8/4- $1015

Re: Lumber Pricing RANT!!

#7

Re: Lumber Pricing RANT!!

Andy Lincoln,in Dearborn,MI

>Thanks to all who replied.It is now easier to understand the pricing involved.Now that it has been explained I can swallow the costs alittle easier.

Andy