Spalted maple Book stand - Wife's Birthday present
Mike Johnson - Chicago
>I was struggling more than ever with my annual "what do I get my wife for her birthday?" Jewelery and fancy dinner were not a great financial option this year!
We have a deep wood working wish list (entertainment armoire, dining room chairs, bedroom suite, etc) so she is not typically going to request another wood working project...but I noticed that she has been propping up cook books and lamenting about needing a book stand!
Knowing I have a bunch of "interesting" pieces of wood that need a home, and this being a "smallish" project, I researched and designed a book stand for her.
The curly spalted maple was particularly "punkie" and not likely to support heavy books/wear and tear; so I resawed it to about 1/8" and glued book-matched panels to both sides of a 1/2" plywood core.
That solved 1 problem, but provided another...dovetail slots through plywood. I cut oversized through dovetails into the veneered panel and then filled them with ebony. After gluing the edging on, I cut the through dovetails needed for the runners; this resulted in a continuous banding detail.
Last thing was what to do for finish? I wanted the figure to pop but also wanted to keep the maple from going too dark, or yellow, from oiling. I came across "clear shellac in a spray can" at the borg. I don't recall ever seeing this product before, but it fit the bill!







