Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Easy Question - Dado Depth

Posts

Easy Question - Dado Depth

#1

Easy Question - Dado Depth

Joe in a Cleveland Suburb

>Is there a rule of thumb for dado depth?

I am going to make a quick little desk hutch thingy for my daughters desk in her dorm room. Just something to put on top of the desk to hold books and so on.

The sides are going to have dados to receive shelves. I'm using cheapo borg pine. Nothing fancy. The hutch they (the school) sell is over $60 and it's just screwed together.

For 3/4" pine, is 1/4" okay/typical for dado depth?

Sorry for such a boring mundane question for a Monday morning... :)

Joe

(who does way too little woodworking these days)

Re: Easy Question - Dado Depth

#2

3/16

Mark Mandell - Gone Round In Jersey

>

Re: Easy Question - Dado Depth

#3

Lee Grindinger

The rule of thumb

Lee Grindinger

>The rule of thumb is half the thickness so 3/8" would be best. Since every glue surface is cross grain I'd stick to 3/8" for better strength

Lee