Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Finally, new jointer is running

Posts

Finally, new jointer is running

#1

Finally, new jointer is running

Stephen Kirk in Quakertown, PA

>Well, I got m power upgrade and had the sub panel put in the shop. I added a 220 VAC circuit and a 125 VAC circuit right near the panel. Fired up the jointer and she worked like a charm. Easily face planed an 8" wide oak board with no problems and left a great surface. Only problem I had was that with the dust port connected, but no dust collection it clogged right up. Pulled that off, unclogged and now it's perfect.

In addition, I also plugged my old contractors saw in the new 125 receptacle which is hooked to a 20A breaker with #12 wire, as opposed to it's old 15A circuit on #14 wire. Wow, what a difference. Very little wind-up time, she just snapped right to full speed. Guess that's how the saw should have been running all along.

I think I'm going to like this new found power!

Re: Finally, new jointer is running

#2

What kind of Jointer?

Ralph in Huntington Beach

>

Re: Finally, new jointer is running

#3

Re: What kind of Jointer?

Stephen Kirk in Quakertown PA

>Grizzly G0490X. 8", 3hp with a helical cutterhead and built in rolling base.