Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Brad point bit

Posts

Brad point bit

#1

Brad point bit

DP

>I am in the process of making the Rockler 3 in 1 transition baby bed. I am having a very hard time finding a 7/16" brad point bit that actually cuts a 7/16" hole. This hole needs to be precise in diameter in order for the spindles to fit correctly. Can anyone recommend a good manufacturer - it can be a single bit or a set. As usual, all of your help is appreciated.

Re: Brad point bit

#2

Have you considered a Forstner?

Neal in San Jose

>I've had a lot better luck at getting holes the exact size I wanted with a Forstner bit. I have a set by Frued that works very well, as well as several individual ones from Lee Valley that also hit the size dead-on. I just checked Lee Valley's website and depending on the material, that size is avaliable for $4.60 or $7.00. Go to their site thru the marketplace here at Woodcentral and Ellis gets a wooden nickle or something. HTH Neal

Re: Brad point bit

#3

Re: Have you considered a Forstner?

DP

>Thanks Neal - of course that is the correct way to do it - Thanks for not telling me "shuh duh" like my daughter would have! Thanks again!

Re: Brad point bit

#4

Re: Brad point bit

Nick Tuzzolino

>Lee Valley makes the very best brad point drills in the business. Also, rated BEST in one of the magazine tests a few years back.

Re: Brad point bit

#5

let me guess

Bill Tindall, E.TN

>The spindles are bigger than the 7/16" hole? Using a drill press so things don't wobble about a brad point drill a very accurate hole. But commercial spindles are made using very dry wood and by the time we see them they have swelled beyond nominal size. Drying commercial spindles and dowels with shrink them back to size, but there is danger of them busting something when they swell back up again.