Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Converted my Performax 16/32.....

Posts

Converted my Performax 16/32.....

#1

Converted my Performax 16/32.....

Barry Irby

>To an open drum sander. I have made a prototype table that sits over the drum on my Performax. I see this as allowing me to sand things too large to pass under the drum. I think it only opens to 3" thick, so now I and sand much larger objects. Might even be able to use it somewhat like a jointer to level up things like boxes.

Whats left is to connect the dust collection. I need an elbow to allow for the connection of the hose. I think the Borgs are closed for the forth, but I will get one tomorrow.


img

Re: Converted my Performax 16/32.....

#2

Very innovative!!

Marv

>

Re: Converted my Performax 16/32.....

#3

Re: Converted my Performax 16/32.....

Nelson

>Great idea, now I don't have to buy a Sandflee.

Re: Converted my Performax 16/32.....

#4

Re: Converted my Performax 16/32.....

Barry Irby

>That was my thought. I saw a Sand Flee after I already owned the Performax. I have used the Performax with the top open, but you don't have a table. So far, this is better than I thought it might be. It has some little brackets (?) under it and it just sits in place. Literally open the top and sit it in place. Connecting the DC is going to be the most complicated part. Whole thing is built out of a 2' X 2' piece of 1/2" plywood.

Re: Converted my Performax 16/32.....

#5

Re: Converted my Performax 16/32.....

Nelson

>If you raise the drum up the 3in and istall a box a little more than witdth of housing and add a dust port on it do you think it would collect the dust? Just a thought.

Re: Converted my Performax 16/32.....

#6

Re: Converted my Performax 16/32.....

Barry Irby

>I'm going to try just using the existing dust port. The drum spins toward the lid. I have only played with it for a few minutes, but I am on my way in a few minutes to get an elbow and see if that works.

If that does not work well, I will try your idea of a box under it.

Re: Converted my Performax 16/32.....

#7

Great idea! Thank you!

David G. Sparks

>

Re: Converted my Performax 16/32.....

#8

Had a complete brain F@rt trying to connect the

Barry Irby

>DC. Made and adapter to fit under the hood. Kept whittling it down and down and made another piece to fit on it. Once I got it working had one of those head slapping DOH! moments. Could have just raised the drum about an inch and saved a lot of work. Duh. Of all the things I've had and lost, I miss my mind the most.

Works great.