Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Repairing Front load washer question (OT)

Posts

Repairing Front load washer question (OT)

#1

Repairing Front load washer question (OT)

Barry Irby

>I have a Frigidaire Gallery front load washer. It started making awful noises. Repairman said it was the bearings and that I was just as well off to go buy a new machine. Seems like an honest opinion since he got nothing out of it, he does not sell machines, so he got no repair.

I was wondering if I could repair it myself? Any thoughts? I am willing to put in some time, but I don't want to get tangled up in a monster repair. I have a claw hammer and a Phillips screwdriver that has one little "wing" missing, but the other three are only slightly rounded.

The possible replacement is an Amana from Home Depot. Any thoughts on Amana?

Re: Repairing Front load washer question (OT)

#2

Re: Repairing Front load washer question (OT)

Kneale Brownson..Awaiting return to CO snows

>No thoughts on Amana, but does HD service appliances? If you get some issue within the warranty period, do they come and get it? Do they dispose of your old one?

I usually purchase this sort of appliance from a servicing appliance dealer (fortunately, there's one that's been here through three generations of the same family ownership) that will deliver and remove (I'd put the screwdriver inside the old one) and provide service as well as supply parts when I try to fix stuff after the warranty expires.

Can you locate a bearing and its housing for your washer? If you can, you might be able to get some idea of how difficult the replacement might be. I've torn top-loaders apart to fix stuff and wouldn't hesitate to do the same on our newer front-loader if I could find the parts and a schematic somewhere, like on-line. But I have a bunch of tools because I also do most repairs on my cars too.

Re: Repairing Front load washer question (OT)

#3

Re: Repairing Front load washer question (OT)

Ed F.

>Barry,

Try www.repairclinic.com. I've used it successfully for refrigerator and clothes dryer repairs. You input your appliance and the symptoms and it walks you through possible causes and repairs. You can buy the needed parts and instructions right at the site.

Ed Freestone

Re: Repairing Front load washer question (OT)

#4

Re: Repairing Front load washer question (OT)

Dave Anderson (PacNW)

>Amana is made by Maytag. Maytag makes models just for the orange BORG.

I had an Amana washer that went through 3 timers, 2 main seals and 1 water pump. The main bearing was going out ($400) all in 2 1/2 years. the warranty had expired so I bought a new Maytag with an extended warranty. 2 years later, the main bearing was going. It was repaired by the warranty company. It required a repair that would have cost $700.00, more than the machine did new. It turns out that the only difference between the Amana and the Maytag was the labels and dials! that was 2 years back and the main bearing is going again. NO more Maytags with Chinese bearing! I will spend the bucks for a Bosch machine that comes with a factory 10 year warranty

Re: Repairing Front load washer question (OT)

#5

Re: Repairing Front load washer question (OT)

Clint Searl, at the base of Haycock Mtn

>Go for the DIY repair. But you'll need a bigger hammer, flat bar, and MAPP torch in addition to the three cornered phillips. All washers are now made in one factory in China, so it doesn't matter which brand you buy. Rotsa ruck.

Clint

Re: Repairing Front load washer question (OT)

#6

Re: Repairing Front load washer question (OT)

Chuck Kettler in Greenwood------WebKitFormBoundary

>Had the same washer. My bearings went out after two pumps and a circuit board. The repairman said the same thing to me except he said to buy a top loader. Easy to fix, fewer repairs and you can get two for one of the front loaders. Buys a lot of water.

Re: Repairing Front load washer question (OT)

#7

Re: Repairing Front load washer question (OT)

Glenn Madsen near San Francisco

>No clues on repairing the old front loader. I don't do that, after doing the electronic computer board swap three times on the Maytag front loader we bought 11 years ago when we bought this current house. That's the one that was the proximate cause of the class action suit that Maytag lost...

I bought a top loading Fisher Paykel, and we have been very happy with it. Water use is no higher than a front loader, and capacity is huge. Price was 50% of that of the then current fashion trend leaders.

Bought it from Lowes, and sprung for the extra warranty, which was a good thing. Getting these serviced is somewhat tricky, finding someone that has access to the parts, and an 8th grade education at the same time. We got a good tech on our second go around.

30 years ago, I'd tear into a washer, and I still do the dryer work, but no more on the washing machines. Too much electronic control and custom control boards.

Re: Repairing Front load washer question (OT)

#8

Re: Repairing Front load washer question (OT)

Andy Lincoln,in Dearborn,MI

>Glenn,

Funny you mention Fisher & Paykel.I have been kind of shopping for a new washer and was leaning to the front-loader side but have doubts with all the horror stories I have read here and elsewhere on the web.Today an ad comes from my local Sears Outlet Store,brand new F&P "ELBA" series High Efficiency Top Loader with matching dryer(elec) for $799/the pair.Of course we would require a gas dryer(nothing really wrong with the one we have so buying a pair isn't necessary) which is more(in little fine print) or the washer alone is $469 w an 18 month warranty.Might be off to check it out later this evening.

Andy

Re: Repairing Front load washer question (OT)

#10

Re: Repairing Front load washer question (OT) *LINK*

Bob Entwisle in NJ

>If you don't mind putting in the time, appliance repairs are pretty simple.

I've gotten good help via this web site for disassembly and part identification etc. I usually buy the parts locally in order to get the machine back up quickly.


http://www.repairclinic.com/Washing-Machine-Front-Load-Frigidaire-GE-Kenmore-Style-Appliance-Diagram