Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

OT-Interior waterproofing question

Posts

OT-Interior waterproofing question

#1

OT-Interior waterproofing question

Nat Robison

>I posted a related question earlier about a particular plumbing fitting in a basement I'm helping to finish. Anyway, someone had commented that it looks like an interior waterproofer had been sprayed on the poured walls. It looks somewhat like a popcorn ceiling.

I'm wondering if this material can be stripped using standard paint strippers. Is it toxic at all? Am I opening up a can of worms by removing it since it was likely applied for a reason in the first place. I don't know anything about interior waterproofers. Could it just be a textured paint?

I'm considering tiling or faux-bricking (something fairly rustic-looking since the wall itself won't be dead flat) in a corner that can not be framed in. It seems like the smart thing to do would be to adhere the brick/tile to the concrete.

Re: OT-Interior waterproofing question

#2

JL

Re: OT-Interior waterproofing question

JL

>My personal experiences - I don't like interior waterproofing materials on the inside of cinder block walls. There I was, drill in hand, hitting a cavity about 10-12" up from the floor. All of a sudden - squirt - right into the running electric drill. It was not pretty. Scared me half to death. Hopefully it is just textured paint and you have exterior waterproofing.

A good paint stripper should work. Have plenty of ventilation!!! Wear an air purifying respirator that will filter out the particular active ingredients of the stripper. The fumes will pool in the basement and sneak up on you. If you don't have a respirator, get one.

My $0.02.