Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

1/2 inch thick wood

Posts

1/2 inch thick wood

#1

1/2 inch thick wood

Del Mac

>I am a novice woodworker and have come across something frustrating. Many of the patterns I see call for 1/2 inch thick wood and I can not find anything other than plywood or MDF.

Where can I find the wood I need? I have asked at lumber stores here and they tell me there is no such thing. I live in Canada but surely there must be a place you can buy it here or order it from somewhere.

I travel a lot in the States and would not have a problem buying it down there if someone can tell me where to look.

Please help if you can.

Re: 1/2 inch thick wood

#2

Re: 1/2 inch thick wood

Randy Johnson Connersville IN

>I think the only way to buy 1/2 lumber is to find a sawmill that will mill it to those dimensions. The good thing about buying at sawmills is the price is usually better. The bad news is that any extra milling adds to the price and you can wind up paying as much as BORG prices.

In all, it sounds like a really good excuse to buy a planer. You can get good ones reasonably cheap and if you are willing to wait a little you can find a good deal on a used one.

Re: 1/2 inch thick wood

#3

Re: 1/2 inch thick wood *LINK*

John McGaw

>Most woodworkers quickly achieve the means to make the available wood the desired thickness -- either resawing or planing or a combination of both. Until you do, there are certainly places to buy thin wood. The only problem is finding them. I'll admit that I haven't a clue as to where to look in Canada but in the US one of the better known and trusted sources is Steve Wall Lumber. I've used them for 1/4" cherry for a project when I was too lazy to produce my own in the quantities needed.


Steve Wall Lumber

Re: 1/2 inch thick wood

#4

JL

Re: 1/2 inch thick wood

JL

>You will probably end up with a planer sooner than later.

I usually plane lumber to 1/2" or resaw to near 1/2" and then plane it to final dimensions.

I have seen thinner lumber at Rockler and Woodcraft - but their prices are more than a bit high.

Do you have a local woodworking store or guild that can introduce you to someone who can plane your lumber down to 1/2"?

Would a veneered piece of MDF work for your applications?

Just some thoughts.

Re: 1/2 inch thick wood

#5

Re: 1/2 inch thick wood

Barry Irby

>Don't know how much you want or what species, but one way to get it is to buy drawer material form a company that sells to cabinet makers. They often stock half inch stuff ready made for drawer sides. Much of it is plywood or composite material but some may have real wood.

I agree with the others. A big step forward in my shop was the addition of the planer. I have an older Dewalt and like it. My understanding is you can buy them all day long between $300 and $600. It really was a "turning point" tool.

It also solves the problem of having to buy whatever metric thickness passes for 1/2" It might be 12mm or 12.5mm or 13mm and be sold for 1/2". Doesn't sound like much but if you cut a 1/2" groove and put a piece of 12mm wood in it, it looks like you need to caulk the joint.

Re: 1/2 inch thick wood

#6

Ellis Walentine

Lumber dimension

Ellis Walentine

>Hi Del,

You came to a good place for information. Welcome.

Lumber is usually rough-cut to thicknesses from 1" to 4" thick. That's the way you buy it at the lumberyard, and then, as others have mentioned, you resaw (slice it on a bandsaw) or plane it (through a thickness planer) to the desired finish thickness. If the plans/patterns you want to follow require 1/2" stock, you would buy the next size thicker and plane it down. For that you will need a jointer, to flatten one face, and a planer to plane it to uniform thickness. If you don't have either of those, or access to them (often, other woodworkers in your area or members of a local club can fill in the blanks in your machinery repertoire), you can also buy the wood at a particular finish thickness. I recommend trying our partner site, Woodfinder, to search for "thinwood." I think you will find plenty of suppliers. Call them or click to their website to find out if they have what you want. Tell 'em Woodfinder sent you.

If you are a novice, you will have a lot more questions as you learn the ropes. Come back for advice whenever you like.

Ellis Walentine, Host

Re: 1/2 inch thick wood

#7

Source for 1/2" lumber

Lee Schierer - McKean, PA

>I get all my 1/2" and 1/4" lumber from one of these.


Re: 1/2 inch thick wood

#8

Think I've seen 1/2" stuff at Lowes

Stephen Kirk in Quakertown PA

>I think I've seen some 1/2" stock at a local lowes (for me, east coast PA). If you have a store like that nearby or in your travels you can check.

I really support the advice to get a planer. It's one of those gateway tools. It will let you start working lots more stock and variety than you can usually find. The prices stated in another post, $300-$600 are right on. The Delta and Dewalt 12" planers both work well and are easy to find. Plus, you'll get more experience building a rolling cart for your planer, as "portable" is a bit of relative term considering these things weigh around 90 lbs.

You do need to joint one side of the lumber flat before planing, but since you probably don't have a jointer, there are ways to do this on the planer itself with beds and shims. Fine Woodworking had an article on this a while back. Otherwise, if you have any hand planes you can use them to get one side reasonably flat.

Hope that helps. I've been where you are and know what it's like.

Re: 1/2 inch thick wood

#9

Lee Grindinger

It's possible...,

Lee Grindinger

>It's possible that some lumber dealer still has wood closer to your needs. In the trade it is (archaically) known as backer board. Before the advent of manufactured products wood was milled with purposes in mind and one of these purposes was cabinet backs which were applied as boards 1/2" thick using lap or tongue and groove joints.

You may use the term "backer boards" in your inquiries to mills and dealers but I doubt anyone not eligible for the senior discounts will recognize the term.

Lee

Re: 1/2 inch thick wood

#10

Re: 1/2 inch thick wood *LINK*

mdclor

>Del,

One of the things that I enjoy about wood working is that there are often multiple solutions to any particular challenge. Others have given you good advice about getting a planer and a jointer or finding a local club. If you stay with the hobby and flat work, these are indispensable tools.

However, in the mean time, you might be able to use "1/2" inch plywood and cover the exposed edges with edge banding. One source is Lee Valley. Another option might be to redesign the piece to accommodate 3/4 inch stock. It depends on your particular application which, if either, solution would be appropriate for you.

Good luck with your wood working.

Merle


LV Edge Banding

Re: 1/2 inch thick wood

#11

Also *LINK*

Lee Schierer - McKean, PA

>My local lumber source carries 1/2" and 1/4" stock, but it is pricey. I don't think they ship material. They are located about 1.75 hours from the Peace Bridge, just south of Erie, PA. All their material is S4S and dimensioned as shown in the link and totally free of any knots.

Lee


1/2" Lumber

Re: 1/2 inch thick wood

#12

Common as dirt here

Andrew F in Australia

>Hi Del,

It's a common size here - produced when timber (US: Lumber) is milled from 3/4" rough size. Our two common sizes are 3/4" (19mm) and 12mm (approx 1/2")

I'm sure that it must be more common over there than what's being proposed, especially in these trying times, but I'm 8000 miles away.

Cheers,

Andrew