Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Went Shopping!

Posts

Went Shopping!

#1

Went Shopping!

Stephen Kirk in Quakertown PA

>Had no trouble getting the new toy back from Grizzly. Only real problem was miserably slow construction traffic on the way out.

I gotta say, Grizzly makes checking out and buying machines really easy.

Plus, this jointer, the G0490X, was another $100 off at the store.

Boy that bad is one heavy sucker, though. With my wife to help we lowered one end onto a dolly and she walked it back while I grabbed the other end. Pretty easy altogether. Biggest issue was finding out the the bed was bolted onto it's wooden pallet and needing to tip it up to get them free.


img

Re: Went Shopping!

#2

The pieces

Stephen Kirk in Quakertown PA

>Got most things broken down, everything seems to be there. Time to clean all the shipping gunk off the bed (yuck, always hate that part). Then on to assembly. Looks like it goes together pretty easily. As long as the beds are still coplanar, there is very little setup and alignment to do. Just need a strong back or two to help lift the bed onto the stand. Oh, and I'll need to run out for a plug. I kinda figured it wouldn't come with one attached. I also read about a trick using a car jack to get the motor mounted in position which sound nice and easy.

Pity I have to wait a week to plug it in, but I don't have 220A in the shop yet. That's scheduled for next Thursday. This was just the best weekend to get the machine, so I went.


img

Re: Went Shopping!

#3

Ahhhhhhhh, that new machine smell !

steve mackay

>

Re: Went Shopping!

#4

Re: The pieces

George@Colonel's Workshop-Havertown PA

>Happy Sunday Stephen,

Good luck with that machine. Your 220 VAC will be in before too long and your shop toy shall sing sharp while being "flat".

George

Re: Went Shopping!

#5

JL

Congrats on your new "toy".

JL

>May you get your power in quickly and have many years of safe and productive use.

Re: Went Shopping!

#6

I hate shipping goop!

Stephen Kirk in Quakertown PA

>OK, no way was the machine gonna rust, so I gotta give 'em points for that. But wow, I had to pull all the cutters off the cutterhead (50 of them on this machine) and I got all the main goop off but I have yet to go and get into all the nooks and crannies. I know if I don't get it out it'll clog up with dust really fast, so it's worth it. The blade screws were in really tight but I finally got the idea to chuck the star point bit in one of my braces and it broke them free really easily.

Things are going together well. Motor was pretty easy to remount (from it's shipping position). The built in rolling base is a really nice addition.

My straight edge isn't long enough to span even half the bed, but what I could check was dead flat. I doubt I'll see any coplanar problems. Adjusting the outfeed to the knives looks pretty easy.

Fun fun fun. Can't wait till I can actually use it. I have several projects waiting for it.

Re: Went Shopping!

#7

If you still need a strong back

Curt Harms

>I don't have one of those especially but I do have an engine hoist which can be disassembled enough to transport pretty easily and is located about a half hour from Quakertown. Let me know if we can help. Email is curt.harms(at)verizon.net

Re: Went Shopping!

#8

Thanks for the offer, but we got it.

Stephen Kirk in Quakertown PA

>Little tricky getting things off the truck, so we unpacked the bed and all the other items first. Then I set one end of the bed down on a dolly and held the other as we walked it out. Piece of cake. Getting the bed up onto the stand just a heavy but short lift straight up.

Bet that hoist comes in handy on the heavy machines, though. If my garage could take it, I'd attach a hoist to the ceiling, but I don't have the rafter strength for it.

Thanks again!

Re: Went Shopping!

#9

Re: The pieces

DP

>Stephen, I've had a 490 for approx. 3 years and absolutely love it. I've purchased it with the spiral cutter head. What a nice option that is as for as performance and noise wise. Good luck!

Danny