Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Tool pricing for rummage sale - Help please

Posts

Tool pricing for rummage sale - Help please

#1

JL

Tool pricing for rummage sale - Help please

JL

>We received several power tools. They all date from the late 1980s/early 1990s. They are all in reasonable shape. I am going to clean them and rehabilitate them before the rummage sale.

I don't want them to go for flea market prices. They are decent, small bench top tools for the most part. They are all Delta.

8" Bench top drill press (1/4 hp motor)

10" Bench top band saw (1/5 hp motor)

4" Belt/6" Disc sander

10" Table saw w/ 15 amp motor, small table (22"" x 22" or so), stand and stamped steel wings, 24" factory fence, right tilt.

I was figuring on $50 for the drill press, $50 or so for the band saw, $20-25 for the belt/disc sander and $75-100 for the table saw.

I've even got the manuals.

Are those prices too out of line?

TIA.

Re: Tool pricing for rummage sale - Help please

#2

Re: Tool pricing for rummage sale - Help please

paul in AZ------WebKitFormBoundary+isMX5X2paiDYC5e

>Give it a shot.

My -thankfully limited- experience with garage sales is that the best stuff may not even sell and the junk will often get outrageous prices. In one moving sale I had someone fish an almost dead rattle can of paint out of my garbage and offer a quarter. The tail end of a roll of duct tape from the same garbage can also got me 25 cents. Go figure.

A cross-check on prices could be some time spent looking at your local Craigslist. In some ways Craigslist may be a better place to sell because many garage sale prowlers are looking for nickle and dime trinkets.

Pricing on the upper end of what you think its worth may get you what you ask but more likely lead to a negotiated price. Nobody offers more than you ask.

Re: Tool pricing for rummage sale - Help please

#3

Re: Tool pricing for rummage sale - Help please

Marv

>Price your stuff a little higher than what you really want. You need room for negotiating. Something you want $50 for, put a price of about $65 on it. Some people won't try to get you to come down on your price, but the majority will. Also be prepared for someone to offer to buy them all as a package, so do the math and make sure you don't let them go too cheap. The art of negotiation is for everyone to be a winner, at least in their own mind. If you want to sell them as a package, locate them all close together and offer them all at one price, still leaving yourself some wiggle room on the price.

The items you are selling are of the smaller type machines, mainly for hobbiests. Your prices seem reasonable though and making them look clean and spiffy is always a good idea.

Good luck,

Marv

Re: Tool pricing for rummage sale - Help please

#4

Re: Tool pricing for rummage sale - Help please

Glenn Madsen near San Francisco

>Those prices don't seem out of line, but I don't know if your rummage sale is the place to sell this stuff.

Is this a group rummage sale, for some group's benefit? Then post the prices on these gems 'as is', and be done with it.

If this is personal property, then Craigslist is my recommendation...