Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

OT Washing Machine Crapping out question?

Posts

OT Washing Machine Crapping out question?

#1

OT Washing Machine Crapping out question?

Barry Irby

>My Frigidaire Gallery front loading washer is making very loud mechanical cleaning and banging noises. What do you think? Only does it in the spin cycle. Bad bearings? The whole machine is not shaking or moving, just noise.

Re: OT Washing Machine Crapping out question?

#2

Re: OT Washing Machine Crapping out question?

Bill Houghton, Sebastopol, CA

>We had a similar problem with our dryer that did turn out to be bearings, although the dryers, not having water running, use a simpler bearing arrangement than your washer probably does.

Re: OT Washing Machine Crapping out question?

#3

Sounds ominous. Evil spirit maybe

Clint Searl, at the base of Haycock Mtn

>

Re: OT Washing Machine Crapping out question?

#4

Re: OT Washing Machine Crapping out question?

Joseph Mulherin, Sr

>Barry, and others, try this website for solutions for almost all household items. www.repairclinic.com

Re: OT Washing Machine Crapping out question?

#5

Linkage ? . . .

steve mackay

>Don't know about front loaders but my favorite fix on the washer is a hard, white, talc-plastic linkage between the trans and the drum. Its held at each end with rubber gromets. Look under the washer and see if you have white plastic or black rubber debries / shavings.