Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Turning Blank Question

Posts

Turning Blank Question

#1

Turning Blank Question

Edward McCormack

>Hello all.

I picked up some walnut turning blanks and want to make bandsaw boxs out of them. The ends are covered in what seems like wax. How should i get this stuff off? If need be i can attach pics.

Thank You.

Ed

Re: Turning Blank Question

#2

Re: Wax

Mark Mandell - Gone Round In Jersey

>Should be paraffin so scrape off the most, then a hair drier and rag does well, and lastly some naptha or mineral spirits for the clean-up.

Re: Turning Blank Question

#3

PS: Ooops

Mark Mandell - Gone Round In Jersey

>While I answered your question, I neglected to remind you that the wood will be quite wet and (usually) inappropriate for being sawed into a final shape, especially a bandsaw box with its close tolerances on the drawers. The wax is there to keep it from drying and cracking until rough turned. Before you go to your cutting, you might want to dry it to EMC which will be sometime next year.

mm

Re: Turning Blank Question

#5

Fire

Wayne Carson

>