Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

A Morris Chair Gone Greene

Posts

A Morris Chair Gone Greene

#1

A Morris Chair Gone Greene

Jim Shaver - Oakville, Ont, Canada

>A new chair I am working on, some dry fit pics

Photobucket

Rear leg details

Photobucket

Font legs

Photobucket

Curly cherry and ebony, chair based on a Mission Morris chair, featured in PWW by Chris Schwarz, but I have added my G&G thoughts to the original.

Take care,

Jim

Re: A Morris Chair Gone Greene

#2

Re: A Morris Chair Gone Greene

Bill Houghton, Sebastopol, CA

>I'm not entirely sure about the two-layer effect on the ends of the arms; and the mirror image cloud lifts (one upside down - clouds lowering?) on the sides seem kinda overwhelming.

It's an interesting design approach - I'll be interested to see the final chair.

Re: A Morris Chair Gone Greene

#3

Seriously, Dude....

Brian in Sandusky, OH

>Seriously, Dude....

:)

Re: A Morris Chair Gone Greene

#4

Aw, slow down!

Bob Entwisle in NJ

>You are always raising the bar for weekend wannabes like me.

Seriously, nice work Jim. I�m anxious to see the final results.

Bob

Re: A Morris Chair Gone Greene

#5

Re: A Morris Chair Gone Greene

Hikmet C. Sakman -- Victoria, BC.,CDN

>Interesting Jim. I'd love to see it finished. Details are nicely done.

Good show Jim.

Chico...

Re: A Morris Chair Gone Greene

#6

Re: A Morris Chair Gone Greene

Jim Shaver - Oakville, Ont, Canada

>I appreciate your honest thoughts Bill.

I imagine that the arm will blend out the edge once the finish is applied and the cherry has aged, I thought the same, but went with the concept of the original chair to see how I could develop the design.

The original chair had side panels, very much in concert with the A&C feel of the chair, but not what I wanted. I also modified the leg designs to add in some G&G concepts to my interpretation. The open side of the chair really took me a long time to find something I could get excited about, I must have gone through several sheets of 1/8" hard board cutting out concepts and trying them out to see what would work in that space. Going with the mirrored cloud lifts seemed right to me, the front ones cover the area where your hands might find them to explore the feel of them, the rear ones contain the cushion and details around the back of the chair. I am not finished hand shaping them yet (files and rasps), I just have them dry doweled in place for visual fit.

Again Bill, appreciate your open thoughts, they are food for thought.

Take care,

Jim

Re: A Morris Chair Gone Greene

#7

Nice work as always Jim

Don Orr

>I got to see the G & G exhibit at the Renwick Gallery in Washington D.C. this Spring. I bet the brothers would be impressed.

Re: A Morris Chair Gone Greene

#8

Wow Jim! Another winner!

Dominic in Buck's County PA

>Jim,

I'm liking what I'm seeing my friend! I really love the in progress shots. Keep em' up.

I have to re-read that article because I can't figure if the square holes were cut, or formed by mating pieces of wood together.

See ya around,

Dominic

Re: A Morris Chair Gone Greene

#9

JL

Lovely chair. Pretty wood.

JL

>

Re: A Morris Chair Gone Greene

#10

Re: Wow Jim! Another winner!

Jim Shaver - Oakville, Ont, Canada

>Thanks Dom,

The squares are my idea, on the chair that Chris reproduced they had two long horizontal slots, covered by a capture end cap of a second piece of wood. I went for the squares as they are a traditional A&C detail, tying in some of the heritage of the design to the G&G feel as well. Laying them out in solid 8/4 and chopping them out was done by hand.

Take care,

Jim

Re: A Morris Chair Gone Greene

#11

Re: A Morris Chair Gone Greene

Keith Newton------WebKitFormBoundaryV6MZb+tiOpocz6

>Jim I am really liking what you are doing here. I like the negative space created by the opposing clouds. The illusion is that the higher one is in closer than the more distant one in back framed by the window.

As for the two layers on the end of the arm, I would like to have seen the larger round-over opposite. Then maybe even carve a shallow step back toward the front, giving the illusion a flattened scroll. Not that it needs another element, but you would loose the glueline.

What do you plan to cover the seat with?

Re: A Morris Chair Gone Greene

#12

Re: A Morris Chair Gone Greene

Thomas S Stockton

>Jim,

I really like that you took an existing plan and mixed it up with your own ideas and design sense. I've never been a fan of the morris chairs with a panel for a side I always thought that the spindle sides were much more elegant and what you have done using the cloud lift pieces in the sides is a nice touch. The morris chair is probably one of the harder pieces to make your own, which is what you have done. Can't wait to see the finished chair.

I've never had a client commission a morris chair, but if I did the first thing I would do is to find a bunch of different plans to start the design process with. Why reinvent the wheel, it is probably one of the most available plans out there and to be able to see different ways to handle the adjustable back and other parts of the chair will save countless hours of head scratching and design time.

Tom

Re: A Morris Chair Gone Greene

#13

Re: A Morris Chair Gone Greene

George@Colonel's Workshop-Havertown PA

>Good Afternoon Jim,

I am Greene with envy. It looks as though it'll be as spectascular as the others. I casn't wait until you get the piece finished and "sitable".

George

Re: A Morris Chair Gone Greene

#14

Gorgeous

Stephen Kirk in Quakertown PA

>Can't wait to see the final piece and get the "usage" feedback. I've never made a Morris chair but that's on my list of to-dos as I hear they are really comfortable.

I recall this article and I like where you went with the G&G. I was originally against G&G style furniture but I think I'm slowly coming around to it. The pieces can be very tasteful and not overly ostentatious. As time goes by I see more pieces that I might like to make.

Re: A Morris Chair Gone Greene

#15

Alan Young

Ya know that chair is going to really clash

Alan Young

>with the two Morris chairs you already have. I'm sure you don't want your furniture to squabble with each other so I'll be by to pick it up as soon as it's finished.

Keeper of the piece.

Alan

Re: A Morris Chair Gone Greene

#16

Re: Ya know that chair is going to really clash

Jim Shaver - Oakville, Ont, Canada

>Thanks Alan,

Nope, if I were you I'd wait to see the G&G sofa I am making as well, then I'd make my pick!

Take care,

Jim

Re: A Morris Chair Gone Greene

#17

Re: A Morris Chair Gone Greene

Jim Dillon

>Hi Jim,

A little late to the party, but I like what you have done so far. What are you planning for the back? I think once you get the back designed and in place, the chair will "come together" and be exciting to see. Be sure to show us some pics when you have the finish on and the cushions in place; maybe next week?? 8-) 8-) It is tough to take a classic design and think outside the box, but I think you have done so very successfully. Keep up the great G&G work!

Jim

Re: A Morris Chair Gone Greene

#18

Speaking of Backs

Mark Mandell - Gone Round In Jersey

>Will this be fixed or the (traditional) recliner style? I not that you've not (yet?) drilled the stopper holes in the inside edges of the arms.

Nice start so far. Will be looking to see the finish.

mm

Re: A Morris Chair Gone Greene

#19

Re: Speaking of Backs

Jim Shaver - Oakville, Ont, Canada

>Hi Jim and Mark,

I have made the back, the more typical ladder style of back, but with ebony plugs up the back and ebony on the crest rail for more detail. I have spent a lot of time working through a variety of hardware options for the pivot and have settled on solid brass hinges. The setting mechanism will be a cross rail that I will set into the arms via several set recess cuts.

Thanks,

Jim

Re: A Morris Chair Gone Greene

#20

Re: A Morris Chair Gone Greene

Jim Shaver - Oakville, Ont, Canada

>Thanks Tom,

This is my third Morris Chair, a first on this theme. The other two I made followed your thoughts, I assembled 7 plans and took what I liked in them, then set to personalize them a bit with my own ideas. As you say why re invent the wheel, so many options to borrow from that are well thought out already.

The current chair was based on one that Chris has reproduced as mentioned. He actually owns the original and was so very kind to offer images of that chair to help me go beyond his original article and develop my own ideas. I enjoy original design, but also like to enhance an existing classic if I want with details that inspire me. One part of the G&G world is that so few pieces were ever really made, so the potential to expand it's look and design is really limitless given the basics of the concept.

I did receive a thumbs up from Darrell Peart on the CWW about my design, that was a wonderful feeling to have that confirmation from another G&G maker/designer.

I enjoy seeing how people react to this chair, it will be one that suits some and not others. I hope that it is one that is made a few times over as I move into making pieces to sell in the future, Dana my daughter will be the owner of all my original prototypes, heavens knows what she'll do with three Morris Chairs!

:-)

Take care,

Jim

Re: A Morris Chair Gone Greene

#21

Thanks

Jim Shaver - Oakville, Ont, Canada

>Thank You All for your kind words and thought,

Don, I appreciate that you think the Bros. would like the design. George, I think it might be the best of the three I have made when I am done. Chico, it's Eye Buggy wood, eh!

I will post it with finish and with cushions.....

Thanks also to Chris Schwarz for sharing his emails and images with me of the original, we are a tight community and it is graced by generous people in publication like Chris who also enjoy seeing us flourish in our creative ways

Take care,

Jim

Re: A Morris Chair Gone Greene

#22

Re: Speaking of Backs

Mark Mandell - Gone Round In Jersey

>I considered the cross-bar/notch style when I made mine, but opted for the 2 wood pegs as I used the same thing (wood pegs) for the two hinges. Advantage of the pegs is that if the ladderback racks a hair (Cherry do move after all), you can hide it by making one of the pegs just slightly larger to compensate. That way, you don't have the telltale "tap" when someone sits in the chair. DAMHIKT |;-}}}

Re: A Morris Chair Gone Greene

#23

Re: A Morris Chair Gone Greene (modified)

charlie belden

>As noted, the end of the armrest doesn't seem to fit - as presented. I used PhotoShop to add one possibility for carrying the "cloud lift" element to the armrest. And if the armress is wide enough, a mortise in the underside of the armrest would avoid having to cut a matching curve in its front support.

Just an idea to throw out there for your consideration.

Do have a question about a couple of the "ebony" spline elements. Normally, they're used functionally - to account for and hide expansion and contraction of other parts or to strengthen a joint. Here, the ones just below the armrest seem purely decorative - and somewhat incongruous - implying a component on the side opposite them - which ain't there.

Interesting piece, nicely executed.


img

Re: A Morris Chair Gone Greene

#24

Ellis Walentine

Critiques

Ellis Walentine

>Hi Jim,

First, let me applaud your decision to take the Morris chair into new territory. As much as I like the A&C style, I think its good parts need to be kept and the rest improved. My biggest beef with the traditional Morris chair (besides the boxiness, which is part and parcel of the design) has always been its visual weight. Dark wood and claustrophobic enclosure of space conspire to make the classic design heavy and so 1900s-looking. Your design exercise addresses these problems, so I sense you are feeling the same way.

I'm harboring some thoughts about your new design, but I really want to see the piece finished and upholstered before logging my comments. You have pondered this design a lot and it shows. The woodworking is gorgeous.

Ellis

Re: A Morris Chair Gone Greene

#25

Re: A Morris Chair Gone Greene

Bill White

>Please alert me as to when I can expect shipping. I want to make sure that I'm home when the truck gets here.

Bill