Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

How to pre-treat yellow pine for staining

Posts

How to pre-treat yellow pine for staining

#1

How to pre-treat yellow pine for staining

DP

>I'm helping my son replace all of his trim in his house. We picked out yellow pine and were wondering what is the best way to prepare it for staining. We have read so many different stories about it blotching. -Some say mix varnish and mineral spirits, some say mix denatured alcohol and shellac, etc. - I am wondering if any of you have any tried and true suggestions. Thanks for your help once again!

Danny

Re: How to pre-treat yellow pine for staining

#2

"Yellow" pine ?

steve mackay

>

Re: How to pre-treat yellow pine for staining

#3

Re: How to pre-treat yellow pine for staining

Fred Davis

>I did our Sunroom ceiling and Wainscot in Yellow Pine Car siding , which is also known as Vee-Grooved 1x6 some places and Vee Rustic on the west coast and after describing the look I wanted to Jeff Jewitt , he said mix Amber and Clear shellac , half and half and that gave a warm glow to the Pine.

To change the color by staining , I always use a wash coat of Shellac over pine to combat that blotching you heard so much about.

Works very well for me, some use Gel stain which gives you a lot of control over the evenness of the color , because it doesn't penetrate very much.

Decide on a look or color and try either way on some scrap.

FredD

Re: How to pre-treat yellow pine for staining

#4

Re: How to pre-treat yellow pine for staining

Michael Bush

>I've used the wash coat of shellac thinned with denatured alcohol as well.

In addition to stabilizing the color, it keeps the natural turpentine in the wood (especially in knots) from messing up the final finish.

Re: How to pre-treat yellow pine for staining

#5

Minwax or SealCoat

Tim Greif - West of Chicago

>I've had good results staining pine after applying either Minwax Pre-stain Conditioner or Zinsser SealCoat thinned with denatured alcohol per the insructions. I feel the Minwax product was a bit easier to use. Both controlled the blotching.