Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Box lid T&G . . .

Posts

Box lid T&G . . .

#1

Box lid T&G . . .

steve mackay

>FINALLY found the new home for all my gages and blocks in a shop in John Waynes's birthplace . (I know I should have made one but I ain't good at it.) Two questions though. Do we call the ends of the lid Tounge & Groove ? It is end grain meeting side so might be fillister ? And the REAL mystery . . . what might it have held ? The dealer seemed to think cigars but the box isn't sealed at all and no remaining odor. I would think it was used for much the same thing as I have in mind. What say the Sages of WC ?


img

Re: Box lid T&G . . .

#2

Re: Box lid T&G . . . 

steve mackay

>


img

Re: Box lid T&G . . .

#3

Re: Box lid T&G . . .

Michael Bush

>That's called a breadboard end, but it's an unusual one. I've never seen one with the tongue on the end piece and the groove in the main board.

Re: Box lid T&G . . .

#4

JL

Re: Box lid T&G . . .

JL

>As Michael said - a breadboard end. I'm thinking it held gauge blocks or something similar. It would not be used for cigars.

Re: Box lid T&G . . .

#5

Re: Box lid T&G . . .

GalenV in Iowa

>For old spools or bobbins of thread or fine yarn?

WAG