Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Which Triton Router

Posts

Which Triton Router

#1

Which Triton Router

Steven McKinley

>I've narrowed down my choice of new router to one of the Triton routers. I'm getting it to be used mainly in my router table. The 2 1/4 Triton has the benefit of the above the table router bit height adjustment, but of course the larger Triton has a horse more power.

So is the convenience of the above the table adjustment worth the sacrifice of a horse of power or vice versa?

Re: Which Triton Router

#2

Re: Which Triton Router

Al Goldstein

>Steven,

I just put a 2 1/4 Triton router in my router table. I don't have a lot of experience with it yet. However, the reason I chose this Triton is the fact that it comes with two collets; a 1/4 inch and a 1/2 inch. The larger Triton has only one collet and an adapter for 1/4 inch router bits. I've read that adapters are not as good as a dedicated collet.

Don't know if I made the right decision, but I think either Triton would be a good choice for a router table.

Al

Re: Which Triton Router

#3

Re: Which Triton Router

Ed Mulligan

>I have the 2 1/4 hp version, use it hand held and in a table. The vertical height feature works well in the table. I have to gently push up on the router housing from below while operating the handle. I think I read somewhere of a fix for this but I haven't felt the need to follow up on it.

The dust collection feature alone is a good reason to get this router!

Re: Which Triton Router

#4

Re: Which Triton Router

BilWil

>I have the 2 and 1/4 in my router table. I bought it on sale when they brought out the model with the above table height adjuster. I have not felt the need for more power on anything, yet. I did have a large PC, about 3hp as I remember, that I sold after I got the Triton. I never used it to capacity because when using the larger bits I slow down the router speed and the feed rates. The PC was a heavy beast and made a lot of noise.

Re: Which Triton Router

#5

Re: Which Triton Router *LINK*

Bob Lemon , Sacramento CA.

>Steve, I advise you to go to the Triton Users Forum in Australia for information on the Triton. I took a look and found a string that said they quit making them.


http://www.woodworkforums.com/forumdisplay.php?f=15

Re: Which Triton Router

#6

The decision has been made

Steven McKinley

>Well with the advice of the forum I've decided to go with the 2 1/4 h.p. model. It sounds like it does the job for everyone and the variable speed should handle any large bits I may want to use.

The link that Bob supplied, pointing to the the Triton users discussion group, did cause me a little bit of concern, but in hopping and skipping around the site it appears that you can still get warranty work done in N.A. It also looks like a buyer is just around the corner, so I'll take my chances.

Thanks everyone for your input.

Steven