Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Kitchen Drawer Slides

Posts

Kitchen Drawer Slides

#1

Kitchen Drawer Slides

Bob Schaefer

>I have 8 kitchen drawers that I need to replace the slides on. I would like to upgrade them to full extension, self close or soft close slides. The existing slides are side mounts. I have had good luck with Accuride slides in the past. However, Internet reviews of the of the self close slides say that the closing mechanism is harsh and opening them is difficult. The soft close Accurides have been recently introduced and I couldn't find any reviews of them.

What would you recommend for this application?

Re: Kitchen Drawer Slides

#2

Re: Kitchen Drawer Slides

Woodie49

>I have been useing Accuride self close slides in all my Custom Cabints for over Five Years, and everyone likes them. Never had any problems with them.

Re: Kitchen Drawer Slides

#3

Re: Kitchen Drawer Slides *LINK*

Keith Newton------WebKitFormBoundaryV6MZb+tiOpocz6

>Bob, Here are the ones that I have started using. The price is better than any of the other brands that I know of, and the holes all work with my templates.


http://www.amazon.com/Extension-Precision-Bearing-Closing-Overtravel/dp/B0006FKWWU

Re: Kitchen Drawer Slides

#4

Re: Kitchen Drawer Slides

Fred Davis

>YOu can't go wrong with Accuride for drawer sides in my opinion and they are used on all of my Kitchen Cabinets and utility cabinets and work benches, storage andlie that.

Be sure to check for side clearence, there is very little departure from 1/2" on each side allowed.

FredD

Re: Kitchen Drawer Slides

#5

Re: Kitchen Drawer Slides

Bob Schaefer

>It's good to hear people are having a good experience with self closing slides. It's always difficult to determine whether bad Internet reviews are a result of poorly designed slides or the installation is the source of the problem. Poor installation can make a good slide turn into a tug of war. That's why I wanted to post the question here. I knew I would get good answers here.

I am aware that the easy close slides require a total 1 1/16 inch of clearance. I measured 2 of my openings and they are surprisingly close to that dimension. The cabinets themselves are well built but the original slides are stamped galvanized metal and the rollers are getting worn out after 25 years of service.

Re: Kitchen Drawer Slides

#6

Re: Kitchen Drawer Slides

Bob Schaefer

>Thanks, I'll check those out. I'm always open to trying new suppliers....with a good recommendation :)

Re: Kitchen Drawer Slides

#7

Re: Kitchen Drawer Slides

Jim Dillon

>Bob,

Five years or so ago, I used Accuride full-extension, self-closing sliders on a number of my kitchen drawers and like them still. Never had a problem with the self-closing. Like you said, they now have a new model, but I have no experience with them. On many other drawers, I have used the Blum Tandems, and, though expensive, are really, really nice. I seem to recall that expense was why I didn't use the Blums on all the drawers, plus loss of some drawer depth. Hope this helps.

Jim

Re: Kitchen Drawer Slides

#8

Re: Kitchen Drawer Slides

Chris Friesen

>I've used the Lee Valley self-close soft-close side-mount ones. Don't think they're Accuride, but same idea.

They're not as nice as the Blum undermount, but they're way less expensive and I don't have the vertical height for undermounts so I'm replacing my existing ancient kitchen slides with the side mount ones as I rebuild the drawer boxes.

You need to tug a bit at first when opening the drawer to overcome the closing mechanism springs. You get used to it though.

Re: Kitchen Drawer Slides

#9

Re: Kitchen Drawer Slides

Bob Schaefer

>I looked at the Blums and they seemed very nice. However, I didn't want to modify my existing drawers to use them. I didn't measure the depth of the openings but I suspect that would be a problem. I would love to try the Blum slides on a new, small project.

Re: Kitchen Drawer Slides

#10

Re: Kitchen Drawer Slides

Bob Schaefer

>I will look at the Lee Valley slides also. I quite honestly didn't think of them in my search but I have had good luck with every Lee Valley product I have ordered. Thanks for pointing me in a new direction!

Re: Kitchen Drawer Slides

#11

Re: Kitchen Drawer Slides

Jim Dillon

>Bob,

I have used the Lee Valley slides on several projects and they have worked just fine, plus come in colors 8-). They sure look like the Accuride sliders, but I could be way off.

Jim