Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Bubinga table top and...

Posts

Bubinga table top and...

#1

Bubinga table top and...

Scott in Douglassville, PA

>...a painted poplar base?

I've been busy painting and reorganizing the house. We have an actual living room now, with old, ugly furnishings. I'd like to build a coffee table and end tables to go in there, and need to keep to a tight budget. I have a pretty good stock of 8/4 poplar, so I'm thinking the tables will have painted poplar bases. I'm going to need to buy material for the tops; I can get bubinga for about $6 and change a BF locally, and I've been wanting to use the stuff for ages. But will bubinga look good on a painted base? Or cheesey?

Alternately, I might have enough thick ash for bases, but don't know if the contrast in woods, and pore sizes, would be pleasing.

Help?

Scott

Re: Bubinga table top and...

#2

Re: Bubinga table top and...

Thomas Skaggs, Foothills of Mount Level

>See my post below. I chose to dye the base black. That allows the "star of the show" to be what is above. Bubinga will be the "star" of your tables. Paint is ok but I would go with dye and a finish consistent with what you use on the Bubinga. If you decide to use a different wood for the base then chose a tight grained wood rather than an oak or ash. Tighter grained woods will not compete with the Bubinga.

Tom

Re: Bubinga table top and...

#3

Re: Bubinga table top and...

George@Colonel's Workshop-Havertown PA

>Gppd Afternoon Scott,

I agree with Tommy. I'd do the table legs and frame in either birch or common cherry, and then dye. I think your bubinga top would really stand out handsomely.

George

Re: Bubinga table top and...

#4

Re: Bubinga table top and...

Mark Mandell - Gone Round In Jersey

>Nothing wrong with your color sense in putting showy wood on a neutral base. Will echo Tom's comment on closed grain wood, but will go farther and recommend against the poplar. Reason being that its relative softness will not wear well from the inevitable bumps that will occur on the legs and edges. In your area you should be able to get some plain-jane "soft" silver maple fairly cheap, and that will be far far better for the legs/bases. I use poplar as "secondary wood" meaning elements that will be veneered or otherwise hidden like in upholstered arms.

Re: Bubinga table top and...

#5

See by yourself

Bricofleur

>Hey Scott,

This 12' long table made from one stab of babinga sits on a steel base. Credits goes to Morgan in Arizona and Crhis in BC, Canada.


img

Re: Bubinga table top and...

#6

Another view

Bricofleur

>Hope it will give you a good idea of a 'contrasting' base, which is more than acceptable, but just great! This base really celebrates the bubinga.

Best,

Serge

www.atelierdubricoleur.spaces.live.com


img

Re: Bubinga table top and...

#7

Re: Bubinga table top and...

Bill Tindall, E.TN

>Why not all Bubinga? Seems like legs are a small bd ft fraction of the whole table.