Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Deck Ledger Board - DUH!

Posts

Deck Ledger Board - DUH!

#1

Deck Ledger Board - DUH!

Dan M

>Hello. Been a while since I was here.

I believe this is a no brainer, but here goes. I am rebuilding a deck and intended on using as much of the original framing as possible as it is in pretty good shape. I got a good look at the ledger board. I have a typical vinyl sided home with that 1/2" thick insulation all over it. When they built my house and deck, they installed (nailed) the 2 x 10 ledger board OVER the foam. I am thinking this is BAD BAD. Believe right way is to lag screw it into the rim joist in a location where in inside floor joist is located. They did not use flashing either, but that is easy to remedy. All in favor of me pulling off all the deck joists (14 of them) and reinstalling the ledger board right on the rim joist with lag screws, say Aye, the rest say Nay! Thanks!

Dan M.

Re: Deck Ledger Board - DUH!

#2

Lee Grindinger

Aye! No, Nay!..., umm, lemme think

Lee Grindinger

>It's interesting that the answer is not a forgone conclusion since you're redoing the deck. How does the board look now? How long was it in place? If it's sound and still reasonably well attached to the house I'd just run some nice 1/4" or 3/8" to add some beef. If the deck is supported in other places there may not be much strain on this ledger board.

So, I vote... Dunno. Authoritatively!

Lee

Re: Deck Ledger Board - DUH!

#3

Re: Aye! No, Nay!..., umm, lemme think

Dan M

>Deck was solid. Been there 20 years. Decking itself was bad. Support structure seems OK. But there is actually a LITTLE play in the ledger. I mean, I am 61 - I ain't gonna do this again soon. I just think the way they did it was wrong.

Re: Deck Ledger Board - DUH!

#4

Lee Grindinger

Well, we all need a hobby

Lee Grindinger

>20 Years in place with a LITTLE play? I hope my work fares as well. I'd add a few lag screws to beef it up and let it go.

However, if you need a hobby let er rip.

Lee

Re: Deck Ledger Board - DUH!

#5

Ellis Walentine

My two cents

Ellis Walentine

>Hmm. Let's think this through. That play you're worried about is because of the compressed foam insulation, presumably having compressed more over the years and now being a little looser than it used to be. I agree with Lee: tighten the existing bolts and add a few more if you think it helps. The important thing is that the shear strength of the bolted joint is enough to carry the deck load with a reasonable safety factor. It hasn't failed you yet, so unless you plan to have bigger parties or heftier guests, and the wood isn't rotten, you probably have no cause for concern. Plus, who knows, that insulation may be keeping water from infiltrating your rim joist and causing you a world of extra hurt.

This isn't to say that removing the soft material is never justified. If I'm attaching something, say a shelf ledger or a torsion box cleat, to a sheetrock wall, for example, I will carefully mark and cut out the sheetrock directly underneath the ledger at the studs where the bolts go, and replace it with a piece of hardwood. That way, when the bolt becomes the fulcrum of a lever, the area in compression is up against something that won't compress and deflect.

Ellis

Re: Deck Ledger Board - DUH!

#6

Re: My two cents

Dan M

>Thanks for the info gents. I'll tightene it down good and let it ride. The idea of the insulation keeping out water sold me.

Regards,

Dan M

Re: Deck Ledger Board - DUH!

#7

Rain on your parade.....

Barry Irby

>As a Home Inspector for 25 years, I can't even guess at the number of rotten band boards (rim joists) I have seen. There must have been thousands. Bolting the deck to the house has been frowned upon around here for a long time. Much better to have the deck have it's own supports. We jokingly (bad joke at that) call them the "Wedding Party Deck". Everything is fine until you have the big reception at your house and the deck falls down. I just heard about another today on the national news. Google deck collapse.

You should go under your house if you can and examine the rim joist from the crawl space or basement. It's possible it was treated lumber or it was properly flashed and it did not rot. It could be the looseness you feel is the rotten wood around the bolts. It is possible that the deck has an inner set of legs and is only bolted to the house to keep it stationary and not to support it. Its possible you are in a dry climate and don't get enough rain to rot anything. You might be looking at the twentieth year of a deck that was slated to fall down in its twenty first year.

We find that decks that have a wide overhang above them, with gutters, and are properly flashed, generally don't rot out. If wither the gutters are missing or the flashing is not there, there's about a fifty fifty chance, if neither is there, you are just waiting for the rot. It also depends on whether the wind blows the rain into the connection or out and away. This is humid central Virginia. Be careful.

Re: Deck Ledger Board - DUH!

#8

Re: Rain on your parade.....

Fred Davis

>Barry has it right , independant support of a deck adjacent to a dwelliny is what the UBC looks for in decks.

Beyond that , you can't beat post and beam support on piers for a deck or a house for that matter, simplicity itself.

In the time that ledgers were allowed directly attached to the house , flashing was required between the ledger and the rim joist, the siding was not allowed to touch the deck surface, one ince clearence was generally the norm , likewise for any siding in a splash area , like a front porch or stoop.

FredD

Re: Deck Ledger Board - DUH!

#9

Well its like this...

Dan M

>Rim joist is like new. there is a bit of a roof overhang in that area. New ledger already up. The most painful part of doing this is digging the post holes 3 feet deep and a foot around, getting 15 bag of sakrete and mising it and filling it. Nothing but rock and clay here. I used a shale bar for a shovel. So it is up and see me in 20 years and I'll tell you how it is holding up!!!

Thanks, All.

Dan

Re: Deck Ledger Board - DUH!

#10

Re: Deck Ledger Board - DUH!

Bill Houghton, Sebastopol, CA

>There should be a gap between ledger board and any other wood on the house - water draining from deck to ledger board is inevitable, and you don't want a place where water can collect and begin rotting the framing.

On my porch, I used washers between ledger and framing. There are similar devices specifically built for the purpose, but two galvanized washers should do it.

I was taught years ago, "Think like a drop of water, then build so the water is directed outward from the house." Flashing, caulking, etc.

Re: Deck Ledger Board - DUH!

#11

Good Idea, but.....

Barry Irby

>The gap should be wider than what would be created by two washers. Water will find a way to bridge a gap that narrow. Generally it should be 3/8" or more. So the water will fall out and so will most debris and you can clean out the crack if necessary. I have a 1" gap on mine and it has been there 30 years and is fine.

Building the deck independent of the house is still a better idea.