Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Finished EC, works in a drawer

Posts

Finished EC, works in a drawer

#1

Finished EC, works in a drawer

Lee Schierer - McKean, PA

>LOML wanted an EC for our TV and stereo equipment, but didn't want a huge Armoire type. She also wanted to "hide" the electronics when not in use so doors were needed. It had to go into the corner of our living room so the design was a corner cabinet. I worked out the details with my cad program and was able to address the biggest concern I had which was how to get to the wires of the electronics if the cabinet was in the corner and would weigh too much to move when full.



The answer was to put all the electronics on a pull out shelf arrangement with over travel slides. The slides are longer than the pull out unit plus they have enough over travel that despite the depth of the sliding door track, I can just see and reach behind to plug things in and all the wires are hidden behind the pullout.



I did not install a fan, because the fit of the electronics leaves enough space for air circulation, plus there are air slots in the back panel.

The cabinet is made of red oak with red oak plywood for the interior hidden portions. The raised panels were done on my table saw with a little help from my router (I have instructions on my web site on how to do this). The doors are mounted on sliding rollers in plastic tracks. The inner doors and the outer doors are all the same width and height so they are inter changeable and pass behind one another. The inserts for the sliding doors are really easy to use and adjust for height if needed. The shelves in the pull out and side compartments are fully adjustable.





All the 45 degree angle bevels on the carcase pieces were easily done thanks to my Beal tilt box digital angle gauge. I was able to make the needed cuts separated by several days and lots of other 90 degree cuts and still get the angles perfect.

The stain is a Minwax Brazilian Rosewood stain and the finish is Deft semi gloss clear wood finish.

Thanks for viewing.

Re: Finished EC, works in a drawer

#2

No pics for me ;-(

Dan Donaldson

>

Re: Finished EC, works in a drawer

#3

HELP! MY EYES! MY EYES!

Mark Mandell - Gone Round In Jersey

>I can't see! There's no pitcher, just these little squiggles and things . . . . .

[oh, wait, those are words]

But

Where's the be.. um,..pic?

Re: Finished EC, works in a drawer

#4

Re: HELP! MY EYES! MY EYES!

Lee Schierer - McKean, PA

>I can't explain it the pics work on my puter

Lee

Re: Finished EC, works in a drawer

#5

Jim DeLaney, Austintown, Ohio

Re: HELP! MY EYES! MY EYES!

Jim DeLaney, Austintown, Ohio

>Lee,

The "properties" show the pix as Sawmill Creek pics. Doesn't Keith have some sort of a block on using SMC as a photo storage site? I seem to recall him doing that years ago, before he kicked me off for questioning his judgement...

Jim D.

Re: Finished EC, works in a drawer

#6

Re: Finished EC, works in a drawer

Joseph Mulherin, Sr

>Lee, I, too, made a TV console to contain our large screen unit. It stands at 6ft x 4ft wide, made of two sheets of birch plywood with six drawers underneath and a full shelf above the TV.... sort of like the unit Fred Davis made a few weeks ago.

BUT, it too is heavy to move around....so... I install some 4 inch caster wheels underneath the unit as I started building. Now, if I want to move the unit I can easily. Also have the same setup underneath our large aquarium stand.

Re: Finished EC, works in a drawer

#7

Fred Davis..did you post pics of your EC?

Terry Alexander

>

Re: Finished EC, works in a drawer

#8

Klunky workaround to see pixx

Kneale Brownson..Awaiting return to CO snows

>If you right-click on the red X, select properties, highlight the URL (at Sawmill Creek!!!!) and cut'n'paste it into your browser window, you can see the pix. That's provided you're a registered member at that other place and are signed in.

It is a purty project.

Re: Finished EC, works in a drawer

#9

Re: HELP! MY EYES! MY EYES!

Kneale Brownson..Awaiting return to CO snows

>Probably because you have to be a signed-in member of Sawmill Creek to see the pix????

If you host them somewhere else where registering/signing in is not required (I pay a pittance to use PBase), your url.

Re: Finished EC, works in a drawer

#10

Re: Finished EC, Photos

Lee Schierer - McKean, PA

>Here's the photos that should Have appeared above:








Sorry for the confusion

Lee

Re: Finished EC, works in a drawer

#11

Re: Finished EC, Photos

mdclor

>Lee, the pictures were well worth the wait. Very nice design and execution.

Merle

Re: Finished EC, works in a drawer

#12

Ellis Walentine

Hey, very tasty.

Ellis Walentine

>Thanks for posting them again. That looks like a wonderfully designed project, Lee. Nice work.

Ellis

Re: Finished EC, works in a drawer

#13

Re: Fred Davis..did you post pics of your EC?

Fred Davis

>I haven't made a Enmtertaiment Center in a long time Terry,maybe your thinking of someone else.

FredD

Re: Finished EC, works in a drawer

#14

Re: Finished EC, works in a drawer

Fred Davis

>A drawer for the electronics sure makes hooking them up a breeze.

good idea

FredD

Re: Finished EC, works in a drawer

#15

My Eyes

Mark Mandell - Gone Round In Jersey

>Feel much better now after this dose of "candy" |;-}}}}

Nicely done, Lee.

Re: Finished EC, works in a drawer

#16

Re: Fred Davis..did you post pics of your EC?

Joseph Mulherin, Sr

>Sorry, Terry, I meant Curtis Gauthier.