Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Finishing

Posts

Finishing

#1

Finishing

Bart Leetch

>After rubbing down with steel-wool a surface finished with Poly Urethane can I spray lacquer over it?

Re: Finishing

#2

Why?

Bill Tindall, E.TN

>probably not but as in all such cases, test concept. Why would you want to add a less hard, less resistant finish over a urethane?

Re: Finishing

#3

Re: Why?

Bart Leetch

>Thanks for the answer.

Re: Finishing

#4

Re: Why?

Fred Davis

>Poly being a synthtic Varnish of sorts , don't be surprised if Lacquer blisters it.

FredD

Re: Finishing

#5

Re: Finishing

Howard Acheson

>I would not overcoat an oil based finish with a lacquer if the finish was less than a year old. The chemicals in lacquer thinner are very aggressive and can react with fresh oil based finishes.

While lacquer is a quite a bit harder finish than oil based poly, it is inferior in some other areas. Why are you considering doing it?

Re: Finishing

#6

Re: Why?

Howard Acheson

>>> Poly being a synthtic Varnish of sorts

What do you mean by a "synthetic"? Poly is a standard oil based varnish where some urethane resin has been used or added to the alkyd resin that is used to make most varnishes. Any varnish is a mixture of a resin (alkyd, phenolic, urethane) and a drying oil (linseed, tung, soya). The two are mixed and then heated until a new compound is formed called varnish