Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Bosch Tools

Posts

Bosch Tools

#1

Bosch Tools

mdclor

>I have been a happy user of Bosch tools for the last several years, but today that came to an end. First a little background: I dropped a drill (clearly my fault) and needed to have it serviced. The servicing company didn't know the meaning of the word "service" so I needed to get a regional manager involved and was more than satisfied with the outcome. Next, my router wouldn't turn on, so I had it serviced and all was fine for 2-3 months, then the switch "died" again, so I had it repaired again. Somewhere along the way my ROS sheared off the bolt that holds the sanding pad onto the actual unit. I replaced the bolt and had the sander up and running in no time. Today, the bolt came out of the ROS, probably just vibrated loose, so I replaced and tightened it. That lasted for about a minute. I have decided that I will not purchase another Bosch tool. Has anyone else had 2 tools "die" in the same day? I should also mention that I do not "lean on" my tools to make them work "better".

I stepped onto a very slippery slope and ordered a Festool 6" ROS, something I never thought I would do. I am looking at options for a replacement router. I think the Festool prices are outrageous, but if that is what it takes for reliability, so be it. Cry once....

My reason for mentioning all this is that I have been a Bosch proponent a number of times on this site and I want to set the record straight so as to not steer any in the wrong direction in the future.

Rant mode off,

Merle

Re: Bosch Tools

#2

Re: Bosch Tools

Alexander Grigoriev

>The router switch would often clog with dust. It's a well known problem.

Re: Bosch Tools

#3

Re: Bosch Tools

mike from american sycamore

>ok...you had a few small problems,,,it just happens,,,,my Festool sanders also go down. The pads wear out and the brushes need changed. I have several Bosch tools that perform highly, relax. It is just not worth getting upset about. anything made by man will always fail

Re: Bosch Tools

#4

Re: Bosch Tools

Randy Stukenberg

>I've had the same problem with my ROS. A little drop of Locktite on the screw does the trick.

My switches also get full of dust. I try to blow them out once in a while and it often helps.

Re: Bosch Tools

#5

Re: Bosch Tools

Fred Davis

>Bosch is the tool maker of choice for me, I had bought Stanley for years and stayed with Bosch after they took over.

If he is still with them Chris Carlson is the guy to talk to about Bosch, no more knowledgeable guy is around , that I know of.

FredD

Re: Bosch Tools

#6

Re: Bosch Tools - Germany

Joel M. Dibbern-Kramer

>The quality of the Bosch line of tools is much better in the U.S. Than what they sell in Germany. A great many of the tools come in the level for the occasional weekend DIY's. Nothing that a great many professionals here would work with. In their defense though Bosch does have a few pieces of equipment/power tools that are designed & mfg. well. But you have to know which are the ones to pick cherries vs. lemons?

Re: Bosch Tools

#7

Re: Bosch Tools - Germany

Barry Irby

>I recently bought a Bosch SDS drill. Can't say I am terribly impressed. It drills in concrete, but it ain't magic. what I noticed when I was buying it was that some of them were made in Germany and some were made in China. Depended on the size. Maybe I am a little China phobic, but I bought one made in Germany.

As to your other problems, tools do wear. The bolt falling out might have been an error on your part. If you had a service guide for it, I bet it calls for loctite on that bolt. Not knowing that, you left it out. Can't expect it to work well if you skipped a step.

And switches do fill up with sawdust. I have had several go that way. I actually took apart the one on myPerformax and it was truly full of dust, packed. I did not have the dexterity to reassemble it. Just could not get the little parts to sit still for the final step. bought a new switch for a few bucks and went back to work. Now that one has gotten glitchy. Wish I had save the old one, I might take another whack at assembling it.

Having said all that, I wonder, Why in the H3ll do tool manufacturers sell tools with switches that fill up with sawdust? Sort of seems like a DUH! to me. Imagine that, sawdust in a workshop in a woodworking tool.

Re: Bosch Tools

#8

Re: Bosch Tools

Chicago Bob

>I had the same kind of problems with PC tools about 5 or 6 years ago. Switched to Bosch at that time and am completely happy that I did. I have 3 different lithium ion powered drills, small trim router, Bosch shop radio & ROS with which I am very pleased with, but I do try to buy Bosch tools made in Germany.

Regards

Bob

Re: Bosch Tools

#9

Re: Bosch Tools

mdclor

>Thanks for the encouragement. I am a week end warrior and try to buy quality/dependability and to have two tools fail in one day was disheartening. I will try to repair the ROS and router and see if I can get back on track.

Thanks, again,

Merle

Re: Bosch Tools

#10

Re:Tools - General

Joel M. Dibbern-Kramer

>It is all about the cost to mfg. Begining middle and end of story.

Whether it is "Fit for purpose" as the Brits like to say is another story.

Re: Bosch Tools

#11

Re: Bosch Tools

George@Colonel's Workshop-Havertown PA

>Good Morning Merle,

I have the Bosch jig saw, and consider it the best saw of its type I've ever owned. Completely satisfied in every respect. OTOH, my experience with Bosch cordless drills and their 1295 ROS was dismal. To be fair, I've had mixed performance from all other manufacturers except Hitachi and Milwaukee.

George

Re: Bosch Tools

#12

Jesper, Denmark

Re: Bosch Tools

Jesper, Denmark

>There are two grades of Bosch tools. The green ones are consumer/hobby and the blue professional. Other than the color and the price, I do not know how they are different. They physically do not look different.

Re: Bosch Tools

#13

Re: Bosch Tools

Fred Davis

>Morning George,

your spot on about the Bosch Jig saw , I give one of these to the high school shop teacher to award to the most deserving student every year.

I have use d a barrel grip Bosch every since they were available in this country and that is a long time .

It is also the choice of every "pro" who uses a jig saw frequently.

I have at this time nine different Bosch routers which I started acquiring when Stanley sold out, never a problem with any.

Bosch router bits are made on the old Stanley line and though pricey , you can't find a competitive bit on that level , much less a better one.

Of course this is only my opinion ;-))

FredD

Re: Bosch Tools

#14

Re: Bosch Tools

Jim Dillon

>Merle,

Sorry to hear about your run of bad luck; I'd be upset as well. I got a good 10 years out of my first well-used Bosch 9V drill. Liked it so much, I got another and it is still doing fine after 5 years or so. My D-handle Bosch saber saw, like Georges, is still doing super after 13 years; I use it most to break down 8/4 rough lumber. I would get another if it failed. On the other hand, my Milwaukee cordless "pencil" drill didn't last long at all (but my Milwaukee circular saw and corded drill are still going strong after after 32 years). My Dewalt D333 planer broke a cog early on, but has been super for 13 years. My hard-used PC ROS, except for routine belt breakage and pad change, is still going strong after 13 years. I try to remember to blow out my tools with compressed air and maybe that helps - who knows. Sorry for rambling on, but my limited experience with Bosch has been good. But those Festools sure are enticing 8-).

Jim

Re: Bosch Tools

#15

Certainly No Surprise Here, Fred

George@Colonel's Workshop-Havertown PA

>Good Afternoon Fred,

Yes, I agree strongly about the Bosch jig saw. My hands are a bit too small for the barrel grip. My #3 son is a finish carpenter, and uses two of the conventional Bosch jig saws professionally. My jig saw is the best I've ever had in my 70 years

I'm sure I'd like the Bosch routers and bits. Years ago I standardized on P+C 690 routers/bases. I have three of the 690 series and the 7518. They are bullet proof. If my HF laminate trimmer ever goes, I will consider the Colt as a replacement. I never owned or used a Bosch router bit.

George

Re: Bosch Tools

#16

Re: Bosch Tools

Glenn Madsen near San Francisco

>I've never seen green Bosch. Maybe they're for another geographical market? It HAS been some decades since I was in Europe, though.

Re: Bosch Tools

#17

Re: Bosch Tools

Jesse Cloud

>Hey Merle, what a bummer. Where did you take the Bosch for repair? I tried to find parts at a couple of places and just go to the internet now.

I started on the Festool slope a couple of years ago and never regretted it. Most of my other brand tools have gone on craigslist. Very little DeWally left, but oddly enough, my Bosch tools (drill, routers, jigsaw) are still in use.

Re: Bosch Tools

#18

Re: Bosch Tools

mdclor

>Jesse,

I took the router to Power Tool and Saw Service on Richmond NE, but wasn't too impressed with their service when I had to take it back there a second time. Now I will look for another place to try.

I usually don't try to repair things myself because my woodworking time is limited and I don't want to spend it trying to fix tools. Usually I don't have some needed tool or knowledge to fix the broken one anyhow.

I hope the Festool is good because I have a really hard time justifying their prices for my skill level. The sander really ticked me off because I had just replenished my sandpaper supply from Klingspor's and had to buy more to go with the Festool sander.

Fortunately days like this don't come along very often or I might be tempted to take up golf...NOT! LOL

Merle

Re: Bosch Tools

#19

I like my Colt

Randy Stukenberg

>I got one a couple years ago and really like it. The only problem is that the spindle lock iw worthless. It lasted about two bit changes and stripped out. You need to find a thin wrench to hold the spindle while you use the other wrench on the collet nut. I also have a PC trimmer. I like the colt because it has a much larger open area to see the bit in action.

Re: Bosch Tools

#20

Re: Bosch Tools - Europe

Joel M. Dibbern-Kramer

>What Jesper, Denmark mentioned in his post on Wednesday, 10 June 2009, at 11:32 a.m. was what is available in Europe. I have seen the Bosch blue in America not the green line of tools. The exception would be some (a very few) of the portable/battery powered tools. Below is an example/PIC of an EU Bosch jig saw.


img

Re: Bosch Tools

#21

I'm sure its mother loves it

Bill Houghton, Sebastopol, CA

>I recall that, some years back, Bosch was selling a jigsaw that was clearly a "consumer-grade" saw as the entry level saw in the U.S. Not many sold, I think.