Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

WC Weekend Accomplishments.....

Posts

WC Weekend Accomplishments.....

#1

WC Weekend Accomplishments.....

Dennis E Peacock

>8 Jun 2009

Good Morning,

Beautiful weekend here. Many enjoyed the outdoors this weekend while some of us worked. The good news is that I'm working new projects at work and that means continued employment to me.

No woodworking for me this past weekend, just work, church, and spending time with the family as we brought the boys home from church camp last night around 8:30PM. They had a good time but was also glad to be back home. Of course "we" were glad to have them back home as well.

Today, I will ride and provide escort for the funeral of Private William Long, age 23, that will killed here in Little Rock this past week. Some of you may have read about it or heard about it in the news. Sad story and please remember all those that are presently fighting for our country in your thoughts and prayers.

That's it for me....so what did YOU do this past weekend?

Best of weeks to you all.

Dennis

Re: WC Weekend Accomplishments.....

#2

Re: WC Weekend Accomplishments.....

Dan Donaldson

>Went down to visit a couple of the grandkids then finished up the stage 1 installation on the bike. Need to take it in to get the efi remapped today. Hopefully will get to some woodworking later this week.

Re: WC Weekend Accomplishments.....

#3

Alan Young

24 Today ...........................NOT

Alan Young

>Jack Bauer-

24 Years with Eileen :^)

In the woodworking world I stimulated the economy by purchasing a new PC 890 variable speed router because my 690-burned out :^(

Alan

Re: WC Weekend Accomplishments.....

#4

Recovery Mode

George@Colonel's Workshop-Havertown PA

>Good Morning Charlie, and a Very Happy Monday to you.

We are in a recovery mode. My #3 daughter had a house warming for friends and siblings on Saturday. I have three kids from the DC area, and each came up to stay with us in our little matchbox house. My #2 daughter Lizzy brought along my youngest grand daughter. We coped with air mattresses and the two couches. We had a great time. Great food, and enough cold beer for lotsa left overs. Lizzy approved of the work done on her new dining room table, which I have fully fabricated but not assembled. She made her choice of edge profile. I willorder that router bit today. I also need her to decide on a stain/color, and provided her with samples for she and her husband to choose from. After they all left for Silver Spring and Alexandria, I glued up and clamped the legs into the frams, and inverted it on the underside of the table establish a permanent location. Now for sanding and router work this week.

Have a great week, Dennis.

George

Re: WC Weekend Accomplishments.....

#5

It Burned Out??????

George@Colonel's Workshop-Havertown PA

>Good Morning Allan,

I can't believe a P+C 690 COULD burn out. It seems impossible. Mine have gone on, and on, and on, although I did have one rebuilt after dropping it. Good luck with the 890.

George

Re: WC Weekend Accomplishments.....

#6

My woodworking involved a Chain-saw

Keith Newton------WebKitFormBoundaryV6MZb+tiOpocz6

>I cut up a huge,,,,, well 32" diameter water oak tree, which fell across the camp driveway during the flood.

When I wasn't working on that, I paddled my canoe up the creek taking photos. I managed to find five freshly emerged dragonflies, which I took some pretty neat macros of.

However I barely missed getting photos of a pair of Anhingas which are playing hide and seek with me. I like to paddle my camo-canoe up the creek behind the cypress trees which are out lining the channel. I try to not make a sound or even a ripple, but they still seem to spot me first, then just dive from the branches straight into the water, then swim away under-water.

Getting a good photo of this rare bird for my creek is my next quest. ha

Re: WC Weekend Accomplishments.....

#7

Alan Young

shredded armature *LINK*

Alan Young

>Hi George,

I was routing some molding using the 690 in my router table. I smelled some unpleasant melting aroma, and took apart the the router and found bits and pieces of what this diagram identifies as part no 1- Armature was breaking off.


I'll take some pics of it later. The parts replacement is about $150.00 plus time and shipping. A one hour run to Woodcraft and $211 got me the upgrade to the VS 890.

That 690 did not see very much running time. I am quite surprised at it's malfunction but I had littler choice as I really needed to get this molding finished up...

Alan


PC 690 part diagram

Re: WC Weekend Accomplishments.....

#8

Paul Kramer

25 - Tomorrow

Paul Kramer

>The LOML and I celebrate our 25th year of wedded bliss tomorrow.

Re: WC Weekend Accomplishments.....

#9

Shreded Wheat is Better for Breakfast

George@Colonel's Workshop-Havertown PA

>Good Afternoon Allan,

I remember every incident when a needed tool broke during a job. Time is essential. Why not DIY, or get P+C to, replace the armature and use your 690 as a backup. The one which I had rebuilt cost me about $80, and it works perfectly. I can use two identical 690 machines for dovetailing work, or any other time I need to retain precise set ups. The added advantage is that it fits all my other bases. Good luck with the 890.

George